Calais Turbo
22-06-05, 15:02
|
#1 |
|
Gold Members
  
|
jd custom plenums for sale
JD CUSTOM automotive 11 progress st mornington 5975 7008 0410 597 533 proud sponsor of the VL TURBO NATIONALS full mechnical workshop latest diagnostic scanners dyno tuning 450kw dyno dynamics a/c regassing and repairs all repairs small or large diff rebuilding, auto rebuilding auto elec work and of course full fabriction shop, alloy welding anything made to order just opened exhaust shop side of bussiness can supply and fit any exhaust systems, mild steel, stainless, hi flow cats, mufflers, extractors, full custom made tig welded mandrel bent systems made to order jamie custom made plenums to suit- rb30, rb 20, rb25 specs- 6ltr volume fully TIG welded tuned length ram tubes accepts std air bypass valve (optional) MADE TO SUIT XF T/B, NOT INCLUDED $700+post with tig welds showing  $800+post sanded down and polished as below  polished piping kits includes all silicone hose, clamps etc $600   weld quality on 1.6mm alloy pipe  $250 polished catch can to suit lh or rh side  ba xr6 plenum fully cast alloy $1150   xr6 under car surge tank complete with 044 pump, fittings $895  vl under car surge tanks $795 with hoses,044 pump all fittings $300 bare tank $440 tank and 3 fittings and hoses   no holes piping kits to suit plenums $650 with silicone hose clamps etc   gen 3 i turboed 468rwkw @10psi Last edited by jdcustom; 11-02-10 at 21:29. |
|
|
|
|
|
|
27-06-05, 17:09
|
#6 |
|
Official Member
 
Join Date: 04-08-04
Location: NSW, Hunter Valley
Car: 5spd calais turbo aero, 196rwkw on 11psi; Turbo diesel Rodeo 4X4, lifted, muddies etc; V8 Turbo Landcruiser (work truck)
Trader Rating: (30)
 |
do these plenums fit without any modification apart from cooler pipes and throttle cable? such as all the standard idle control etc?
|
|
|
|
|
27-06-05, 20:27
|
#7 |
|
Gold Members
|
very easy to fit just drill out the thread in lower half of runners so allen key bolts can go up though hole into new plenum base, idle air valve can be fitted to the rear(optional), power steering resverior has to be moved down a bit, use a walkinshaw throtle cable as they use a xf t/b std, holden still has them $45, and i can tap 1/4bsp holes in the base to suit fuel reg, boost gauge etc, let us know how many holes u want.
|
|
|
|
|
08-07-05, 22:27
|
#10 | |
|
Gold Members
 |
Quote:
__________________
"FIRST U GET THE MONEY, THEN U GET THE POWER, THEN U GET THE WOMEN" |
|
|
|
|
|
|
|
|
09-07-05, 00:51
|
#11 |
|
Gold Members
|
$600 polished piping hose clamps nd silicone hose, piping is to suit the hybrid type coolers getting round which can be brought for $220 on this site.
Last edited by jdcustom; 14-02-06 at 20:37. |
|
|
|
|
09-07-05, 07:34
|
#12 |
|
Gold Members
|
how bout if i was to get a plenum and the piping? still same price or can u do some sort of deal?
__________________
"FIRST U GET THE MONEY, THEN U GET THE POWER, THEN U GET THE WOMEN" |
|
|
|
|
09-07-05, 08:21
|
#13 |
|
Still a player
|
Or can you do piping for a standard plenum and hybrid cooler as all the other promised kits are full of crap.
__________________
Just because you're unique, doesn't mean you're usefull. |
|
|
|
|
09-07-05, 11:13
|
#14 |
|
Player
Join Date: 06-06-05
Location: Melbourne, South-East
Car: ORIG SII VL Calais Turbo
Trader Rating: (3)
|
im buying a hybrid tube and fin cooler havnt found piping yet but if i was to buy this kit would it fit straight on no worries? what sort of perforamnce would this gain and with cops how would it work? is it illegal to have this modifyed?
__________________
Original VL Calais SII Turbo www.sammyb.com.au www.myspace.com/sammybmelbdj www.mindlessent.com |
|
|
|
|
10-07-05, 19:11
|
#17 |
|
Player
  |
im very very interested where is JD customs loacated in melbourne?
__________________
The bull**** stops when the green light drops. Why drink and drive when you can drift and slide. |
|
|
|
|
11-07-05, 09:20
|
#19 |
|
Still a player
|
Well theres two guys claiming to but no one has actually started selling them yet.
You might get in first.
__________________
Just because you're unique, doesn't mean you're usefull. |
|
|
|
|
11-07-05, 09:33
|
#20 |
|
Player
|
yeh jamie make standard piping kits...i dont need one but heaps of ppl do...and the other blokes who have promised them havent materialized...slackasses
__________________
from 200 horses to 400 Pegasuses
|
|
|
|
|
|
|
|
11-07-05, 20:15
|
#21 |
|
Gold Members
|
i will make up a kit for the std plenum setup, all ready can use the piping from this kit, from the turbo runs along skirt one hole under air box and out around to the left hand cooler entry, just make a new jig for the right hand side cooler to t/b will be 3" up over dizzy etc, be about a week to get ready will let u's know,
|
|
|
|
|
12-07-05, 00:44
|
#23 |
|
Administrator
 
Join Date: 09-10-02
Location: Melbourne, S.E.
Car: '67 Camaro in the Build... And still looking for a stock'ish BT1
Trader Rating: (40)
|
...
__________________
www.CalaisTurbo.com.au Official Memebership Information CLICK HERE
www.TheGameVine.com For laid back Gammers My 1967 Camaro Rebuild.... Current Status: Stalled.... |
|
|
|
|
12-07-05, 19:11
|
#24 |
|
Administrator
Join Date: 09-10-02
Location: Melbourne, S.E.
Car: '67 Camaro in the Build... And still looking for a stock'ish BT1
Trader Rating: (40)
|
...
__________________
www.CalaisTurbo.com.au Official Memebership Information CLICK HERE
www.TheGameVine.com For laid back Gammers My 1967 Camaro Rebuild.... Current Status: Stalled.... |
|
|
|
 |
| Thread Tools | |
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Plenums...... | Vl_Calais | VL Turbo Discussion | 32 | 12-05-05 21:17 |
| Bresciani Racing Plenums | DABEAST | For Sale - Drivetrain | 30 | 11-04-05 10:45 |
| New custom PLENUMS for sale!!! | davitt | For Sale - Everything Else | 26 | 12-06-04 11:19 |
| aftermarket plenums which is better???? | badbt1 | Engines, Turbos, Exhausts, Intercoolers | 30 | 09-02-04 16:02 |
| intake plenums | MADNESS | Engines, Turbos, Exhausts, Intercoolers | 2 | 23-09-02 20:21 |
