Calais Turbo

ITG-05Z · 06-12-04, 23:05

From purchasing this car it was running a standard VLT setup with shift kitted auto and a high flowed t3 turbo not much to offer. Looks was with a set of 18inch grange rims resprayed grey and walky front bar with a front mount on the front. which is slowly making an image looking like........

will have more pics as things happen

Car specs at the momment are:

HEAD AND BLOCK
Bottom end been machined bored redrilled studs acid dipped 10thou over with wiseco forged pistons and eagle rods. Head redone by JPC in Melbourne reground cam port polish new aftermarket valves springs lifters, able to flow approx 900hp through it.

MOTOR BITS
custom ceramic coated top mount exhaust manifold with 45mm wastegate on it , with a GT35/40R BB turbo 700hp rating. Plenum 7.5L volume with XF throttle on it

FUEL SETUP
Bosch 363 injectors with standard intake pump feeding a surge tank and bosch 044 pump going into a malpassi.

COMPUTER
using a LTX12 Microtech with 6 coils onto it 4 bar map

GEARBOX
550kw keas 3 speed manualised auto with transbrake with 4500 stall

DIFF
Ford 9inch with 3.9 gears in it with a minispool and 31 spline axles shortened an inch either side

BRAKES
standard rears with new discs and calipers and VT slotted twin piston calipers in the front new as well

I am hoping to get a 10 sec pass let me know what you guys think of my car thanks

Ari

more pics.........

just did 300hp @rear wheels on 12 pounds boost not finished on tune yet as tail shaft was trembling so left it at that till i re-balance it and new bearings and unis

will have some more pics of it on the dyno in a week or so and also dyno reading of how much power this thing makes maybe even videos also had the number plates changed got sick of GRKBOY i put on

ITG-05Z in black with silver background

Currently undergoing more work i will be adding a 6 point andra roll cage,parachute, etc to comply with andra rules putting in a 40L fuel cell with two bosch 044 pumps running to a sard fuel reg with sard 1000cc injectors then installing a 2 speed powerglide with transbrake and a 4500 convertor if its enough also currently makin a new manifold to fit a new gt42 turbo then hopefully get the car running a 9 sec pass

this should be complete by the end of the year i hope

wagonshaw · 23-12-04, 13:52

sounds like this is going to be a real neck snapper.

vlt-dreamer · 23-12-04, 16:22

love it mate, nice colour
don't want to be sceptical, but 10 sec timeslip with a manual?

ITG-05Z · 23-12-04, 17:09

gearbox might change if i can sell it for the right price otherwise i will try to do it i have been told the motor will be able to do the ten but everyone has been questioning the gearbox so you never know till you hit the track i guess i would try with slicks too

vlt-dreamer · 23-12-04, 17:18

who did the prep and paint mate???

ITG-05Z · 23-12-04, 17:20

hornsby prestige smash repairs in sydney

StockyMcStock · 23-12-04, 17:30

hope that radiator gets some flow to it, the intercooler seems to completely cover it nicely :s

nice looking manifold, how much did it set you back?

ITG-05Z · 24-12-04, 16:06

hey sold that manifold didnt suit my setup in the engine bay so had to get rid of it for a few reasons one didnt fit the turbo under bonnet and ports didnt match the head

duz360 · 24-12-04, 16:13

Quote:

Originally Posted by vlt-dreamer

love it mate, nice colour
don't want to be sceptical, but 10 sec timeslip with a manual?

sceptic!

ITG-05Z · 24-12-04, 16:15

hey duz360 thanks for the part man hehe you got your money? ok

duz360 · 24-12-04, 16:17

yeah bro.no worries.
have you got it installed yet?
ps go the 10 sec manual passes!

ITG-05Z · 24-12-04, 16:26

hehe i am going to try it my fingers are crossed

i cant drive manual properly yet like for gear changes

ATMO_BT1 · 24-12-04, 16:32

Hey mate what suburb are you from? cant wait to see this cruising round the beaches!

ITG-05Z · 28-12-04, 15:42

from turrumurra way so when its out i cant wait hehe i am keen to get in it and drive it

OVL087 · 29-12-04, 09:46

have you got a side on foto of it with those rims in grey

hope the build all goes well dude , looks like a nice machine

ITG-05Z · 04-01-05, 01:48

i will pull the car out tomorrow and take a shot of it because its in the garage cant get a good enough angle

ITG-05Z · 04-01-05, 01:53

MadVK308 · 07-05-05, 00:45

nice work mate..

ATMO_BT1 · 07-05-05, 18:36

hurry up dude we got a serious vlt shortage in our area!!

VKiller · 20-05-05, 17:31

Hey GRKBOY I live just up the road from you...

In fact I think I've talked to you or your brother a couple of times...

Let me know when its finished, cause I'd love to come have a better look at it...

ITG-05Z · 20-06-05, 09:58

hmmmm when would you have talked to me hehee

how do i know you

ITG-05Z · 24-11-05, 20:52

ITG-05Z · 24-11-05, 20:53

boys bought a keas 3 speed 550kw jatco with transbrake and installed on the car feels awesome cant wait to race it hehe this is how its looking will be going for a full tune next week

duz360 · 24-11-05, 20:56

lookin great arino!

ATMO_BT1 · 24-11-05, 22:32

sure we saw you cruising in chatswood on friday night.. car looks awsome mate i live just in terrey hills, better see you on cruises from now on hehe

06-12-04, 23:05	#1
ITG-05Z streeter Join Date: 23-06-02 Location: Brisbane, Annerley Car: Hiace Trader Rating: (30)	My VLT ex chaser in the Making From purchasing this car it was running a standard VLT setup with shift kitted auto and a high flowed t3 turbo not much to offer. Looks was with a set of 18inch grange rims resprayed grey and walky front bar with a front mount on the front. which is slowly making an image looking like........ will have more pics as things happen Car specs at the momment are: HEAD AND BLOCK Bottom end been machined bored redrilled studs acid dipped 10thou over with wiseco forged pistons and eagle rods. Head redone by JPC in Melbourne reground cam port polish new aftermarket valves springs lifters, able to flow approx 900hp through it. MOTOR BITS custom ceramic coated top mount exhaust manifold with 45mm wastegate on it , with a GT35/40R BB turbo 700hp rating. Plenum 7.5L volume with XF throttle on it FUEL SETUP Bosch 363 injectors with standard intake pump feeding a surge tank and bosch 044 pump going into a malpassi. COMPUTER using a LTX12 Microtech with 6 coils onto it 4 bar map GEARBOX 550kw keas 3 speed manualised auto with transbrake with 4500 stall DIFF Ford 9inch with 3.9 gears in it with a minispool and 31 spline axles shortened an inch either side BRAKES standard rears with new discs and calipers and VT slotted twin piston calipers in the front new as well I am hoping to get a 10 sec pass let me know what you guys think of my car thanks Ari more pics......... just did 300hp @rear wheels on 12 pounds boost not finished on tune yet as tail shaft was trembling so left it at that till i re-balance it and new bearings and unis will have some more pics of it on the dyno in a week or so and also dyno reading of how much power this thing makes maybe even videos also had the number plates changed got sick of GRKBOY i put on ITG-05Z in black with silver background Currently undergoing more work i will be adding a 6 point andra roll cage,parachute, etc to comply with andra rules putting in a 40L fuel cell with two bosch 044 pumps running to a sard fuel reg with sard 1000cc injectors then installing a 2 speed powerglide with transbrake and a 4500 convertor if its enough also currently makin a new manifold to fit a new gt42 turbo then hopefully get the car running a 9 sec pass this should be complete by the end of the year i hope Last edited by ITG-05Z; 14-07-06 at 19:09.

23-12-04, 13:52	#2
wagonshaw \x/estside for life Join Date: 10-04-04 Location: NSW, newcastle Car: mine Trader Rating: (2)	sounds like this is going to be a real neck snapper. __________________ CT \x/ESTSIDE REPREZENT

23-12-04, 16:22	#3
vlt-dreamer Player Join Date: 27-06-03 Location: Melbourne, Northern Victoria Car: Black Territory Trader Rating: (64)	love it mate, nice colour don't want to be sceptical, but 10 sec timeslip with a manual? __________________ Too old for VL's now...:(

23-12-04, 17:18	#5
vlt-dreamer Player Join Date: 27-06-03 Location: Melbourne, Northern Victoria Car: Black Territory Trader Rating: (64)	who did the prep and paint mate??? __________________ Too old for VL's now...:(

23-12-04, 17:30	#7
StockyMcStock NEED A NEW AVATAR Join Date: 02-08-03 Location: Melbourne, North Car: Twincharged RB30DE Trader Rating: (7)	hope that radiator gets some flow to it, the intercooler seems to completely cover it nicely :s nice looking manifold, how much did it set you back? __________________ Click here for details on my supercharged, turbocharged, twin cam VL

23-12-04, 17:09	#4
ITG-05Z streeter Join Date: 23-06-02 Location: Brisbane, Annerley Car: Hiace Trader Rating: (30)	gearbox might change if i can sell it for the right price otherwise i will try to do it i have been told the motor will be able to do the ten but everyone has been questioning the gearbox so you never know till you hit the track i guess i would try with slicks too

23-12-04, 17:20	#6
ITG-05Z streeter Join Date: 23-06-02 Location: Brisbane, Annerley Car: Hiace Trader Rating: (30)	hornsby prestige smash repairs in sydney

24-12-04, 16:06	#8
ITG-05Z streeter Join Date: 23-06-02 Location: Brisbane, Annerley Car: Hiace Trader Rating: (30)	hey sold that manifold didnt suit my setup in the engine bay so had to get rid of it for a few reasons one didnt fit the turbo under bonnet and ports didnt match the head

24-12-04, 16:15	#10
ITG-05Z streeter Join Date: 23-06-02 Location: Brisbane, Annerley Car: Hiace Trader Rating: (30)	hey duz360 thanks for the part man hehe you got your money? ok

24-12-04, 16:17	#11
duz360 VOTE 1 HORSELL COMMON Join Date: 04-06-04 Location: NSW, wollongong Car: muppet mobile Trader Rating: (79)	yeah bro.no worries. have you got it installed yet? ps go the 10 sec manual passes! __________________ extreme turbo manifolds 0242 628774 used by australia's fastest 7.98@171 BOOSTN

24-12-04, 16:26	#12
ITG-05Z streeter Join Date: 23-06-02 Location: Brisbane, Annerley Car: Hiace Trader Rating: (30)	hehe i am going to try it my fingers are crossed i cant drive manual properly yet like for gear changes

24-12-04, 16:32	#13
ATMO_BT1 CT Allstar Join Date: 04-07-04 Location: Sydney, Northern Beaches Car: Trader Rating: (29)	Hey mate what suburb are you from? cant wait to see this cruising round the beaches!

28-12-04, 15:42	#14
ITG-05Z streeter Join Date: 23-06-02 Location: Brisbane, Annerley Car: Hiace Trader Rating: (30)	from turrumurra way so when its out i cant wait hehe i am keen to get in it and drive it

29-12-04, 09:46	#15
OVL087 I wish I had an XE Falcon Join Date: 23-05-02 Location: Brisbane, the local drugstore Car: 9.95 @ 137mph Trader Rating: (28)	have you got a side on foto of it with those rims in grey hope the build all goes well dude , looks like a nice machine __________________ 6BOOST Turbo Manifolds - 0410 730 598

04-01-05, 01:48	#16
ITG-05Z streeter Join Date: 23-06-02 Location: Brisbane, Annerley Car: Hiace Trader Rating: (30)	i will pull the car out tomorrow and take a shot of it because its in the garage cant get a good enough angle

04-01-05, 01:53	#17
ITG-05Z streeter Join Date: 23-06-02 Location: Brisbane, Annerley Car: Hiace Trader Rating: (30)	Last edited by FLWLSS; 06-01-05 at 13:19.

07-05-05, 00:45	#18
MadVK308 I LOVE THE SOUND OF VN's Join Date: 16-08-04 Location: QLD, . . . Car: 5 speed VLT Berlina, VXII Clubby Trader Rating: (23)	nice work mate.. __________________ http://www.prankyourhousemate.com Prankster forum in the making - Come help us make it grow!

07-05-05, 18:36	#19
ATMO_BT1 CT Allstar Join Date: 04-07-04 Location: Sydney, Northern Beaches Car: Trader Rating: (29)	hurry up dude we got a serious vlt shortage in our area!!

20-05-05, 17:31	#20
VKiller TOONZ Join Date: 01-11-04 Location: Sydney, North Pole Car: VX Calais LS1, 87 Berlina Project Trader Rating: (14)	Hey GRKBOY I live just up the road from you... In fact I think I've talked to you or your brother a couple of times... Let me know when its finished, cause I'd love to come have a better look at it...

20-06-05, 09:58	#21
ITG-05Z streeter Join Date: 23-06-02 Location: Brisbane, Annerley Car: Hiace Trader Rating: (30)	hmmmm when would you have talked to me hehee how do i know you

24-11-05, 20:52	#22
ITG-05Z streeter Join Date: 23-06-02 Location: Brisbane, Annerley Car: Hiace Trader Rating: (30)

24-11-05, 20:53	#23
ITG-05Z streeter Join Date: 23-06-02 Location: Brisbane, Annerley Car: Hiace Trader Rating: (30)	boys bought a keas 3 speed 550kw jatco with transbrake and installed on the car feels awesome cant wait to race it hehe this is how its looking will be going for a full tune next week

24-11-05, 20:56	#24
duz360 VOTE 1 HORSELL COMMON Join Date: 04-06-04 Location: NSW, wollongong Car: muppet mobile Trader Rating: (79)	lookin great arino!

24-11-05, 22:32	#25
ATMO_BT1 CT Allstar Join Date: 04-07-04 Location: Sydney, Northern Beaches Car: Trader Rating: (29)	sure we saw you cruising in chatswood on friday night.. car looks awsome mate i live just in terrey hills, better see you on cruises from now on hehe

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
making a manuel VLT run 10's ?	PReSTNBoY	VL Turbo Discussion	84	24-06-05 20:01
VLT making noises	VaXaNaT3	General, Electrics, Engine Management, Wheels, Bodywork	3	28-10-04 22:01
Vlt making noises	VaXaNaT3	Suspension, Brakes, Gearboxes, Diffs	0	27-10-04 16:23
Wrecking VLT + other stuff	Tempest	For Sale - Everything Else	72	25-08-04 13:10
lots of vlt bits for sale!!	b00std	For Sale - Drivetrain	23	12-08-04 17:28

Calais Turbo

Similar Threads