CalaisTurbo New Tags
User Name: Password:

Go Back   calaisturbo.com.au > Readers Rides > VL Turbos
LSX Garage - Performance has a new home...

Reply

 

Thread Tools
Old 18-11-07, 15:30   #1
wld013
Player
 
wld013's Avatar
 
Join Date: 29-01-06
Location: VIC, eastern suburbs
Car: sxybt.1
Trader Rating: (4)
Send a message via MSN to wld013
Sxybt.1

SXYBT.1

I'm sure everyone knows this car but there are going to be some much needed changes done.

Specs are as follows.

Engine: Ross forged pistons, o-ringed, shot penned rods, port & polished, nizpro cam, 036cc injectors, 044 fuel pump, nizpro catch can, 3inch exhaust, front mount cooler, cut and shut standard.

ECU: Old school Motec. 'soon to be updated'

Turbo: TO4 built by ATP, but she blew 2 days ago so it's coming off this week and getting replaced by with a gt35/40

Auto: 2speed power-glide, 3500rpm stall, trans-brake, big trans-cooler

Diff: 9inch, 4:11 'getting a re-built in the next month or 2 with new gears and LSD'

Interior: Custom aarotech seats, water temp gauge, after market steering wheel 'getting new carpet, door trim's & roof liner'

Suspension: Pedders springs and shocks back and front with 90/10's

Brakes: Standard with cross drilled rotors

Wheels: 15inch Interceptors

Car has ran an 11.8 @112mph back in 2002 on slicks and transbrake.
I was told the car ran a 13 flat with the 18inch lenso speed 6's that were on the car and no transbrake. I don't know how much power the car makes or made. My aim is to get 300rwkw and a 9sec pass out of it.

A few pics, but will get better ones up soon:


__________________
PRO FLOW FAB & DYNO-03 8796 3026-WWW.PROFLOWFAB.COM
wld013 is offline   Reply With Quote
Old 30-11-07, 19:09   #2
wld013
Player
 
wld013's Avatar
 
Join Date: 29-01-06
Location: VIC, eastern suburbs
Car: sxybt.1
Trader Rating: (4)
Send a message via MSN to wld013
just posting up some progress pics still alot of work to go. I wish i could pull the engine out and clean up the bay(cuz it really needs it) but lak off cash and i really just want to drive cuz i havent really drivin it yet, got all new carpet and the gt35/40 with ex/gate is almost on and he diff is getting done has soon as thats done than send it of to get tuned.

gt35/40 with manifold(made by Jason giller the gasman)

maifold by the gasman very rare.

gutterd interior.



engine bay with turbo off(dirty as F**K)

just a pic with the new plates on.


like i said still along way to go but ill get updating.
__________________
PRO FLOW FAB & DYNO-03 8796 3026-WWW.PROFLOWFAB.COM
wld013 is offline   Reply With Quote
Old 05-12-07, 18:03   #3
PSIHVN
Bresciani Racing
 
PSIHVN's Avatar
 
Join Date: 08-08-06
Location: VIC, Western Suburbs
Car: PSIHVN
Trader Rating: (7)
Looks tuff man, did you get these plates from a guy in epping by any chance?
How long until u hit the track?
__________________
"Spozchop Racing"
PSIHVN is offline   Reply With Quote
Old 06-12-07, 17:33   #4
wld013
Player
 
wld013's Avatar
 
Join Date: 29-01-06
Location: VIC, eastern suburbs
Car: sxybt.1
Trader Rating: (4)
Send a message via MSN to wld013
a while now turbo and manifold dont fit so i am going to pull the engine out now and get the the guard bashed out and the bay painted, re-locate fuze box and loom, battery to boot etc and clean up uneeded sh*t should look sik once finished got my mate matty on the job he has some orsume ideas.
__________________
PRO FLOW FAB & DYNO-03 8796 3026-WWW.PROFLOWFAB.COM
.
wld013 is offline   Reply With Quote
Old 16-12-07, 16:45   #5
wld013
Player
 
wld013's Avatar
 
Join Date: 29-01-06
Location: VIC, eastern suburbs
Car: sxybt.1
Trader Rating: (4)
Send a message via MSN to wld013
pushed it out today gave it a qwik wash before we pull the engine out.



__________________
PRO FLOW FAB & DYNO-03 8796 3026-WWW.PROFLOWFAB.COM
wld013 is offline   Reply With Quote
Old 28-12-07, 19:13   #6
wld013
Player
 
wld013's Avatar
 
Join Date: 29-01-06
Location: VIC, eastern suburbs
Car: sxybt.1
Trader Rating: (4)
Send a message via MSN to wld013
lowered and painted drop tank silver with black straps..
__________________
PRO FLOW FAB & DYNO-03 8796 3026-WWW.PROFLOWFAB.COM
wld013 is offline   Reply With Quote
Old 03-01-08, 16:03   #7
Unmarked
Kosovo Is Serbia
 
Unmarked's Avatar
 
Join Date: 03-04-07
Location: VIC, Melbourne
Car: 180SX SR20
Trader Rating: (0)
looking tuff... i hope your keeping the aerotech trim cause it really sets the car off!

good luck with it all mate.
Unmarked is offline   Reply With Quote
Old 14-05-08, 12:01   #8
[BLOWN]
iTz oN LiKe DoNKeY KoNG
 
[BLOWN]'s Avatar
 
Join Date: 04-04-05
Location: Melbourne, Whatevers going
Car: Whatever goes hard
Trader Rating: (2)
Any updates? Pretty *** sexy...Top job champ
__________________
Please Fasten Ur SeatBelts, Vehicle Frequentley Sideways.
R.I.P MaMMa 21/11/58 - 16/04/08
[BLOWN] is offline   Reply With Quote
Old 24-05-08, 14:44   #9
wld013
Player
 
wld013's Avatar
 
Join Date: 29-01-06
Location: VIC, eastern suburbs
Car: sxybt.1
Trader Rating: (4)
Send a message via MSN to wld013
yeah in process of painting bumpers mx gray..

still got a bit of sorting out with the foul system before i send it off to be tuned.. and the sxybt.1 plates are back on the car..
__________________
PRO FLOW FAB & DYNO-03 8796 3026-WWW.PROFLOWFAB.COM
wld013 is offline   Reply With Quote
Old 24-05-08, 17:17   #10
SRBMUU
Official Member
 
SRBMUU's Avatar
 
Join Date: 01-07-04
Location: Melbourne, springvale
Car:
Trader Rating: (6)
looks good champ good to see that someone finaly bought it and is going to treat it well not threash it and keep it like a paddock basher. will be good to see it roam the street good luck!
SRBMUU is offline   Reply With Quote
Old 24-05-08, 22:21   #11
wld013
Player
 
wld013's Avatar
 
Join Date: 29-01-06
Location: VIC, eastern suburbs
Car: sxybt.1
Trader Rating: (4)
Send a message via MSN to wld013
haha its still going to be a bit rough but slowly it will get there all work is done in my garage by a mate whos a very good mechanic dont want to go to a work shop when the time comes pete the old owner of rank rotary will be tuning it.... still got a few things to go till it will be back on the road..

will get some updated pics up soon..
__________________
PRO FLOW FAB & DYNO-03 8796 3026-WWW.PROFLOWFAB.COM
wld013 is offline   Reply With Quote
Old 07-09-08, 04:03   #12
wld013
Player
 
wld013's Avatar
 
Join Date: 29-01-06
Location: VIC, eastern suburbs
Car: sxybt.1
Trader Rating: (4)
Send a message via MSN to wld013
update: pulled engine out to clean it up..




__________________
PRO FLOW FAB & DYNO-03 8796 3026-WWW.PROFLOWFAB.COM
wld013 is offline   Reply With Quote
Old 07-09-08, 17:11   #13
Weezy
Player
 
Weezy's Avatar
 
Join Date: 02-05-07
Location: Canberra, Southside
Car: 02' Mazda RX7 FD3S Bathurst Type R
Trader Rating: (15)
That inlet manifold fails imo.
__________________
Quote:
Originally Posted by [T]Matty View Post
who says aus880 is a ****head?


ooh.. everyone
Weezy is offline   Reply With Quote
Old 08-09-08, 17:19   #14
wld013
Player
 
wld013's Avatar
 
Join Date: 29-01-06
Location: VIC, eastern suburbs
Car: sxybt.1
Trader Rating: (4)
Send a message via MSN to wld013
yeah tru but it will do till i get around to getting another one.
__________________
PRO FLOW FAB & DYNO-03 8796 3026-WWW.PROFLOWFAB.COM
wld013 is offline   Reply With Quote
Old 08-09-08, 21:54   #15
YEP_boost
UONP - We will kill you
 
YEP_boost's Avatar
 
Join Date: 16-01-05
Location: Melbourne, SUBURBIA
Car: VLCT/VY ADVENTRA LX8
Trader Rating: (36)
Tell Maatouks those inlets fail! He uses a similar item on his race cars!
__________________
PRO STITCH INTERIORS.
CUSTOMS, REPAIRS, RESTORATION
VOTED 2008 SC TRIM OF THE YEAR
YEP_boost is offline   Reply With Quote
Old 09-09-08, 08:50   #16
CHRGD6
I'm kind of a big deal
 
CHRGD6's Avatar
 
Join Date: 06-04-05
Location: Sydney, Union of No Charles
Car: RB25 VL, 2012 Colorado
Trader Rating: (5)
Quote:
Originally Posted by YEP_boost
Tell Maatouks those inlets fail! He uses a similar item on his race cars!
Same same but different. The differences, while small, are the key. The idea is right though
__________________
In it for the holographic stickers

I know big words
CHRGD6 is offline   Reply With Quote
Old 09-09-08, 22:28   #17
OBZERV
hates car gremlins
 
OBZERV's Avatar
 
Join Date: 22-07-06
Location: NSW, portland nsw
Car:
Trader Rating: (2)
Still good enough to pull a ten second past.

Car looks mint, very different i like. Good luck with it
__________________
b
OBZERV is offline   Reply With Quote
Old 19-09-08, 17:54   #18
wld013
Player
 
wld013's Avatar
 
Join Date: 29-01-06
Location: VIC, eastern suburbs
Car: sxybt.1
Trader Rating: (4)
Send a message via MSN to wld013
i hope to ran in the 10's for now just have to get new loom and wire it all up and drop motor back in than tune it should be back on the road soon..
__________________
PRO FLOW FAB & DYNO-03 8796 3026-WWW.PROFLOWFAB.COM
wld013 is offline   Reply With Quote
Old 28-12-08, 19:52   #19
wld013
Player
 
wld013's Avatar
 
Join Date: 29-01-06
Location: VIC, eastern suburbs
Car: sxybt.1
Trader Rating: (4)
Send a message via MSN to wld013
engine is all back together just have just have to wire my new loom up.


__________________
PRO FLOW FAB & DYNO-03 8796 3026-WWW.PROFLOWFAB.COM
wld013 is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time now is 15:43.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Ad Management plugin by RedTyger