Leondis Racing - Speedflow Range in stock

[peter_fc]

Located in Sydney's Eastern Suburbs at Kensington, Leondis Racing is your local Speedflow dealer, with an in stock range of braided line, fittings, adaptors, weld on bungs and much more.



Our motorsport catalogue shows our full range of catch cans, surge tanks, oil and transmission coolers, silicone intercooler hose and more.

We also specialise in all areas of motorsport, including street, drag, drift, and circuit.

In addition, we also carry out all general maintenence and mechanical repairs for all makes and models.

We can taylor a package to suit your needs.

We have numerous vehicles over the 300kw barrier and regularly visit the race track with our customers.

Here are a few examples of some Leondis Racing vehicles:




And there are many more!!

We are known in the area as brake and clutch conversion specialists, so feel free to visit anytime, and if you have any questions we would be more than happy to help.

For all Leondis Racing & Speedflow enquiries please phone (02) 9662 6344
or call in to see our stock display at,
104 Anzac Pde, Kensington, 2033

Feel free to post any enquiries you may have on the thread and i will endevour to answer them as soon as i can.

[Woggster]

hey are you related to chris leondis?

[slm33d]

What kind of brake upgrades do you do for vl's?.

[VLT87Kal]

Originally Posted by slm33d

What kind of brake upgrades do you do for vl's?.

yer im chasing the same question

[peter_fc]

We have done numerous conversions pending on the braking setup required. Your VT upgrade is the most common conversion for a basic upgrade, including hubs, bearings, discs and calipers. For a larger upgrade to the VT we can fit the four piston caliper setup in much the same fashion as the VT (obviously larger discs), including hubs and bearings.
Packages are available
Call for more information on (02) 9662 6344 or PM me for pricing.
We can post conversion kits anywhere in Australia.

[VLT87Kal]

pm sent

[peter_fc]

Braided oil and water line kits now available.

This is a "full" braided kit including all fittings, washers, line and adaptors to suit top mount GT30/3540 turbos.




All lines are 100 series braided hose
Oil feed line is 200 series teflon braided line
All fittings are Speedflow.

This is a COMPLETE braided kit with everything you need to make all your water feed, oil feed, and return lines.
PM me with your email address and i will send you a complete itemised quote.
Kits are readily available.

Y-piece kits also available if you wish to return your catch can to the sump. All fittings and braid also available

[peter_fc]

Steel and aluminium fittings are available (no stainless).
Have both style fittings to suit 100 series braided hose and the 200 series teflon braided line.
All fittings, adaptors, weld on's etc are in stock also.

[FATMAN]

can u get bright shiny red silicone hoses for intercooler kits and can u get speedflow fittings that are ALL red, not red AND blue?

[peter_fc]

Silicone hoses in red, blue, and black are available.
Speedflow fittings in custom anodised are also available as special order, and can be done in all black, all red, all blue, silver, and raw finish, or a combination of these colours.

[MB_Boy]

do you do a braided line and fitting kit for the vl t3 turbo inc. water and oil feed and return lines, can you send me a quote?

[peter_fc]

PM sent.
Don't have a "kit" as such but am working on it for everyone.
Should be soon

[peter_fc]

Have had many people enquire about photos on the 30/3540 "kit", so i have posted some up for everyone.




If there are any questions please don't hesitate to ask and i will try to be prompt with my reply.

This kit is to suit 6boost manifold, meaning that there may be some slight fitment issues with the kit if other manifolds are used.

Hope this helps everyone.

[Magnum06]

G'day, I need a price on the speedflow 1 way checkvalve for the bosch 044 pump (fits most bosch pumps) Cheers.

[peter_fc]

-6 and -8 one way vavles available.
They are $57.72 ea + freight

[vltrb-0]

im keen on the gt42 oil return adapter and also the block fitting,

if you could let me know some details and providing the price is good i'll direct deposit ASAP

[peter_fc]

PM sent

[Arronvl]

what series hose do i need to run for pulp?
will be chasing a few bits and pieces for my fuel system shortly.
dash 6 &dash 8 sizing.
Cheers,arron

[peter_fc]

100 series suits PULP fine.
Also have alluminium hard line with tube nut fittings which is a popular choice also.

[jbonez]

Gday do you do silver & black fittings?

Can you pm or post your email address have a fellow at work might want some pricing.

[peter_fc]

PM sent

[E-Z]

how much is the gt 35 braided kit? i just got mine done locally this morning, bet your cheaper.

[peter_fc]

PM sent E-Z

[MrSquigle]

Originally Posted by peter_fc

100 series suits PULP fine.
Also have alluminium hard line with tube nut fittings which is a popular choice also.

What price can you do for me on the Aluminium Fuel line? Is there a kit available? any pics of the kit?
Sorry for all the questions but is the aluminium line good to use with E85 also?
thanks

[peter_fc]

Aluminium hard line is fine for E85. The hard line comes in 12ft rolls. Tube nuts and sleeve are used on the ends to adapt dash fittings, for example, the 1/2 inch line runs the -8 tube nut and sleeve, so you can run the hard line from the rear of the vehicle to the front (perhaps the firewall), then adapt your braid to the rail. PM sent with pricing.