back space for an 15x8 rim

[DFECTD]

sorry if this has been brought up before but I cant find it.Looking at a 15x8 weld prostar with a 26x9 slick on it what back space would I be looking at?standard diff,standard springs.i know the seat belt bolt needs to be grinded off.any other useful hints would be appreciated.
damo

[EVLRB30]

Originally Posted by DFECTD

sorry if this has been brought up before but I cant find it.Looking at a 15x8 weld prostar with a 26x9 slick on it what back space would I be looking at?standard diff,standard springs.i know the seat belt bolt needs to be grinded off.any other useful hints would be appreciated.
damo

5" and you should be fine

[DFECTD]

thanks man

[OVR-800ST]

what about for a diff shortened 1.5 inch either side?

[SIroller]

if 5" is good and the diff shrtened 1.5" either side then 3.5" backspace would be safe.

simple math.

[OVR-800ST]

sweet
thanks SIroller

[NSNPWR]

5" BS ain't gunna fit with a standard rear end...no way...5.5" stretching it! More like 6" with a stock length diff...

[bigpsi]

This is a 8.5 inch/5 inch back space convo with a 255 tyre

Can't believe people would give advice that 5 inch backspace fits lol

[DFECTD]

thanks guys,the biggest back space I can find for a prostar is 5.5".....................................guess its a matter of finding out.if anyone has a 5.5" back space 15x8 under their vl id love to hear from you.cheers damo

[bigpsi]

Originally Posted by DFECTD

thanks guys,the biggest back space I can find for a prostar is 5.5".....................................guess its a matter of finding out.if anyone has a 5.5" back space 15x8 under their vl id love to hear from you.cheers damo

I don't think there is any 15x8 that will fit 'properly'

For my car to sit nice needs about 40mm shorter per side (haven't 100% finished measuring)

[DFECTD]

sorry they do a 6.5" I just found out

[RB-GEM]

You could always get a set of 15inch simmons and have them done in whatever offset you want .

[sherman89]

I have 15x8/3.5 inch b/s with 255 et streets, diff shortened 68mm p/side.

[RB-GEM]

Did you have to move the shocks at all ? I thought the brakes would hit the shocks after 50 mm

[sherman89]

All standard just cut down and changed back to drums. i was worried about the drums but the car still pulls up with no chute from 158mph.

[BT]

sherman do u remember the overall diameter of the diff drum to drum because i remember my diff was drum braked and was 1400 from memory ... mind u mine was a vh but iam sure they are the same as vl from memory ...



hear is a pic of it ...

with convos 15" by 8" or 8,5 with 3 3/8s backspace

with simmons 18" by 9"s with 4 inch dish and 5 inch backspace un tubbed






[/URL]

[sherman89]

Nah I don't know the full width sorry. Car looks awesome on the simmons!

[NSNPWR]

Originally Posted by bigpsi

I don't think there is any 15x8 that will fit 'properly'

For my car to sit nice needs about 40mm shorter per side (haven't 100% finished measuring)

I'm having 8s made at the moment, the guy doing them has allowed me to mess around with backspacing...the end result is if you want an 8" cop rim to fit, the inside edge has to be within a few mm of the trailing arm...end up with about 2" of lip so backspacing is more like 6"...I will try and get the measurements off him.

Off the shelf is obviously a different story! As I found out with the convos I just bought...theyre 'flush' to say the least...

[bigpsi]

In my old Calais I cut the lip part off the outer edge of the trailing arm and welded a plate on top of the arm to give the tyre clearance

[RB-GEM]

What's a good size wheel/tyre combo to use at the track when using a standard width vl diff ?

[NSNPWR]

I ran a 15x7 chaser and a 26 (or 28, cant remember!) x9 E/T full slick on a standard rear end...

[NSNPWR]

Got my 8s on the wkend, had some 255/60/15 normal Nankang radials fitted up, big tire!...They fit, just...so far ive ground most of the seat belt bolt off and bent the edge of the trailing arm down out of the way...next will be to trim the edge of the rear bumper...looks tough.

Offset is pretty much standard chaser rim offset, there is minimal extra dish, its all in the inside.

[tubbed1]

Put some pics up Darren if possible...

[kevspec]

Is ajax wheels doing them?

[tubbed1]

No- prostreet performance in adelaide...

Best in Australia... Find him on Facebook! Does 14s 15s 17s chasers from 4inch to 10inch- and various back spacing...