CalaisTurbo New Tags
User Name: Password:

Go Back   calaisturbo.com.au > Regional Events > Western Australia
JD CUSTOM

Closed Thread

 

Thread Tools
Old 27-02-07, 13:54   #1
hurtinit
Player
 
Join Date: 29-04-04
Location: Perth, duncraig
Car:
Trader Rating: (2)
gtr head, gt3540r , lt12s

Hey guys, i have a complete ready to bolt on head with plenium cams, cam covers.. also comes with microtech lt12s with coils... also included is a gt3540r with high mount manifold and a 50 mil gate. The head has been fully serviced only 12 months ago. im looking for 7k complete. I also have a spare head gasket and a spare rb30 na bottom end with virgin bores. im in wa

if your seriously keen let me know on msn justarnold@hotmail.com

---------------------------------------------------------------------------------------------

....I have had a few people ask about seperate prices.. so here they are.............................

GTR head comes with 550cc injectors, hks headgasket, malpassi ajustable fuel reg $3800

lt12s with handset and loom and coils - 1300
gt3540r with rb26 high mount manifold and 50 mil gate and 3inch dump - 1800
600 x 300 with custom stainless piping to suit gtr head - 650
3 inch exhaust with cat - 400
rb25 box with 9 puck excedy clutch - full converson with pedals etc - 1800
28 splin lsd diff with 4.11 ratio 750
huge fuel pump .. ill check what model - 200

the car itself will be for sale aswell... has a good interior - has been retrimmed.. new bumpers etc - its black over silver.. calais... looken at around 4.5k ish.. comes with 6 months rego


prices are a little flexy but not much

Last edited by hurtinit; 27-02-07 at 18:43.
hurtinit is offline  
Old 27-02-07, 15:30   #2
shmik
Player
 
shmik's Avatar
 
Join Date: 29-06-06
Location: WA, Wanneroo
Car: VL Bt1 Turbo
Trader Rating: (2)
Send a message via MSN to shmik
if you decide to seperate the lt12s an coils giv us a pm
__________________
myspace . reow
shmik is offline  
Old 27-02-07, 20:14   #3
vlthunter
Gold Members
 
Join Date: 07-01-05
Location: Perth, northern suburbs
Car: VL calais
Trader Rating: (47)
Send a message via MSN to vlthunter
what brand is the external gate and how many kms on the turbo?
__________________
sometimes the roads less travelled are less travelled for a reason....
vlthunter is offline  
Old 28-02-07, 12:42   #4
hurtinit
Player
 
Join Date: 29-04-04
Location: Perth, duncraig
Car:
Trader Rating: (2)
i would say about 250-500 km's on the turbo if that.. has a polished front housing...also comes with a 3 inch dump.. hks copy gate
Cheers Justin
.
hurtinit is offline  
Old 28-02-07, 12:57   #5
genki
10.84 @ 126mph
 
genki's Avatar
 
Join Date: 14-03-06
Location: WA, Perth, Tuart Hill
Car: Toyota JZX100 Chaser, Toyota Camry daily rocketship
Trader Rating: (0)
im fairly interested, and can come up with money and possibly a deposit by this week.

only thing i wanna know is, and ive asked mick at ovaboost, what the hell would my compression be if i keep my current bottom end and dont change anything,

im assuming my current engine has "lower than std compression" (coz from what ive seen most victorian rebuilt and worked motors have lower than std) so itd be also safe to assume that if a twin cam conversation was taken place it'd lower my compression.......

but by how much?!?!

mick said a lower compression wouldnt be an issue, aslong as it "doesnt go into the sixes, if it duz itll be sh*thouse" (which i already know about, and mine is like a slug coz of the stall it has... and it feels like its "slipping" but thats another story )

also... by the way, wheres the previous bottom end that this head was on?

and damn u... i wanted to buy ur car about 4months ago..... but nooo ;p haha

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaahhhhhhhhhhhhhhhh
__________________
"*Power FC of the picture & FC commander is image. Exhibition is 'only the setting data'."

Last edited by genki; 28-02-07 at 15:32. Reason: Automerged Doublepost
genki is offline  
Old 28-02-07, 16:41   #6
UD_LOSE
Gold Members
 
UD_LOSE's Avatar
 
Join Date: 20-02-06
Location: WA, south
Car: slow and boring
Trader Rating: (9)
Send a message via MSN to UD_LOSE
Quote:
Originally Posted by genki
im fairly interested, and can come up with money and possibly a deposit by this week.

only thing i wanna know is, and ive asked mick at ovaboost, what the hell would my compression be if i keep my current bottom end and dont change anything,

im assuming my current engine has "lower than std compression" (coz from what ive seen most victorian rebuilt and worked motors have lower than std) so itd be also safe to assume that if a twin cam conversation was taken place it'd lower my compression.......

but by how much?!?!

mick said a lower compression wouldnt be an issue, aslong as it "doesnt go into the sixes, if it duz itll be sh*thouse" (which i already know about, and mine is like a slug coz of the stall it has... and it feels like its "slipping" but thats another story )

also... by the way, wheres the previous bottom end that this head was on?

and damn u... i wanted to buy ur car about 4months ago..... but nooo ;p haha

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaahhhhhhhhhhhhhhhh
your pistons will only have valve releif's for 2 valves not 4 so u'll prob be up for custom pistons as i doubt anyone makes a hybrib (30,26) piston
UD_LOSE is offline  
Old 28-02-07, 17:08   #7
MAX PSI
Player
 
MAX PSI's Avatar
 
Join Date: 14-06-04
Location: Brisbane, south east
Car: vl calais RB26dett
Trader Rating: (2)
Send a message via MSN to MAX PSI
Quote:
Originally Posted by UD_LOSE
your pistons will only have valve releif's for 2 valves not 4 so u'll prob be up for custom pistons as i doubt anyone makes a hybrib (30,26) piston

Wisco make a RB30/26 piston
__________________
caltex eflex fuel of choice
MAX PSI is offline  
Old 01-03-07, 18:43   #8
hurtinit
Player
 
Join Date: 29-04-04
Location: Perth, duncraig
Car:
Trader Rating: (2)
bump

bump it up
hurtinit is offline  
Old 01-03-07, 21:16   #9
vhr32
Player
 
vhr32's Avatar
 
Join Date: 23-01-06
Location: TAS, Launceston
Car: VH RB20DET street/track car
Trader Rating: (30)
Send a message via MSN to vhr32
If you use VLT pistons a RB26 twin cam head would make it 7.0 compression approx.
You really need N/a pistons or RB30/26 forgies from CP or Arias, Wiseco's pistons are 7:1 which is too low. Ideally you want 8.5-9.0
Valve cut outs arent an issue.

Any chance of a pic of the turbo, manifold etc? What a/r is the turbo? m.larner@bigpond.net.au
vhr32 is offline  
Old 02-03-07, 00:37   #10
JUSTRYME
Player
 
JUSTRYME's Avatar
 
Join Date: 10-03-05
Location: Sydney, Blacktown
Car: not worthy!
Trader Rating: (0)
Send a message via MSN to JUSTRYME
hmm... black over silver calais...

shame i found a nice vlct now... but its white haha...

u jus sellin with an na motor justin?
__________________
u gotta get ANGRY!!
JUSTRYME is offline  
Old 02-03-07, 15:57   #11
hurtinit
Player
 
Join Date: 29-04-04
Location: Perth, duncraig
Car:
Trader Rating: (2)
head manifold dump sold

i have a rajab biult bottom end with a stock head... i will se11 this with car and box and gt35 , microtech for 11k. Car has 18" mags with 6 months rego, will also part out if the engine goes first

if interested please call 0422944604
Cheers Justin
hurtinit is offline  
Old 02-03-07, 19:44   #12
genki
10.84 @ 126mph
 
genki's Avatar
 
Join Date: 14-03-06
Location: WA, Perth, Tuart Hill
Car: Toyota JZX100 Chaser, Toyota Camry daily rocketship
Trader Rating: (0)
yyyyyiiiieeeeeeeeeeeew boy!!!!!!!!!!!!!!!!!!!!!!!
__________________
"*Power FC of the picture & FC commander is image. Exhibition is 'only the setting data'."
genki is offline  
Old 03-03-07, 19:43   #13
Arkaineus
Registered User
 
Join Date: 14-12-06
Location: International, roman
Car:
Trader Rating: (3)
Email Sent
Arkaineus is offline  
Old 05-03-07, 17:35   #14
hurtinit
Player
 
Join Date: 29-04-04
Location: Perth, duncraig
Car:
Trader Rating: (2)
email replied
hurtinit is offline  
Old 13-04-07, 13:44   #15
TroyVK
Player
 
TroyVK's Avatar
 
Join Date: 15-11-02
Location: QLD, Gold Coast
Car:
Trader Rating: (32)
Send a message via MSN to TroyVK
Quote:
Originally Posted by vhr32
If you use VLT pistons a RB26 twin cam head would make it 7.0 compression approx.
You really need N/a pistons or RB30/26 forgies from CP or Arias, Wiseco's pistons are 7:1 which is too low. Ideally you want 8.5-9.0
Valve cut outs arent an issue.

Any chance of a pic of the turbo, manifold etc? What a/r is the turbo? m.larner@bigpond.net.au
as he said, valve releifs arnt an issue on a 26/30
if you buy 26/30 pistons from CP, they dont have valve releifs, atleast when i had some some time ago they didnt and QRI said that every1 thinks they should have them but they arnt needed
TroyVK is offline  
Old 16-04-07, 11:31   #16
Arkaineus
Registered User
 
Join Date: 14-12-06
Location: International, roman
Car:
Trader Rating: (3)
pm sent
Arkaineus is offline  
Old 19-04-07, 19:05   #17
genki
10.84 @ 126mph
 
genki's Avatar
 
Join Date: 14-03-06
Location: WA, Perth, Tuart Hill
Car: Toyota JZX100 Chaser, Toyota Camry daily rocketship
Trader Rating: (0)
still havent received some sh*t and this guy isnt "contactable", he is ignoring my fone calls.... bullsh*t to say the fk'n least.

oil feed line for the turbo... where is it. now i have to fu*k around and get my own one
some nuts and bolts/studs... where?

oh yeah and the sump thats on the bottom end of this engine.....

nice thats all i gotta say, i wouldnt mind knowing though... with all that metal lying in the sump was the car even running or what..
__________________
"*Power FC of the picture & FC commander is image. Exhibition is 'only the setting data'."
genki is offline  
Old 20-04-07, 13:35   #18
DeVL
Dirty Barrels
 
DeVL's Avatar
 
Join Date: 12-07-05
Location: WA, Mandurah
Trader Rating: (11)
Send a message via MSN to DeVL
come on justin ben paid you alot of money and he gave you a RAJAB built motor the least you could do it reply to his PM's and awnser his phone calls
DeVL is offline  
Old 20-04-07, 18:07   #19
fmx939
kek
 
fmx939's Avatar
 
Join Date: 26-03-06
Location: Perth, sor
Car: vlc 7ltr
Trader Rating: (11)
Quote:
Originally Posted by DeVL
come on justin ben paid you alot of money and he gave you a RAJAB built motor the least you could do it reply to his PM's and awnser his phone calls
r u sure it was built by rajab? just like that head ay!
fmx939 is offline  
Old 20-04-07, 18:18   #20
DeVL
Dirty Barrels
 
DeVL's Avatar
 
Join Date: 12-07-05
Location: WA, Mandurah
Trader Rating: (11)
Send a message via MSN to DeVL
good point... rajab seemed to know about the motor
DeVL is offline  
Old 20-04-07, 18:28   #21
fmx939
kek
 
fmx939's Avatar
 
Join Date: 26-03-06
Location: Perth, sor
Car: vlc 7ltr
Trader Rating: (11)
who knows, the receipts seem magical. im still pissed over all that, maybe its karma time 4 him! or maybe i just got done lol...

Last edited by fmx939; 20-04-07 at 18:59.
fmx939 is offline  
Old 21-04-07, 09:40   #22
holdonv8
got rice bitch?
 
holdonv8's Avatar
 
Join Date: 06-07-05
Location: Perth, ballajura,..........\/\/estside
Car: 26/30,t51r,motec powered vlct
Trader Rating: (12)
Send a message via MSN to holdonv8
what was wrong with the head?

the motor was built by rajab.

whats the go here ben, have you got in contact yet?
__________________
Hong Kong Special

BARRACUTA RACING, 2 IN THE PINK ONE IN THE STINK!!!
holdonv8 is offline  
Old 21-04-07, 10:52   #23
UD_LOSE
Gold Members
 
UD_LOSE's Avatar
 
Join Date: 20-02-06
Location: WA, south
Car: slow and boring
Trader Rating: (9)
Send a message via MSN to UD_LOSE
I feel for you ben, first getting stiffed by Rajab and then trying to get away from that mess getting stooged (no offence stooge ) by another forum member.....i know its buyer beware but people, especially workshops should not bullsh1t people if it were me i would be getting some unfriendlys to pay them a visit if they choose to snoob you off or ignore you

But then again Ben is an easy target

Last edited by UD_LOSE; 21-04-07 at 10:55. Reason: Automerged Doublepost
UD_LOSE is offline  
Old 25-04-07, 17:42   #24
genki
10.84 @ 126mph
 
genki's Avatar
 
Join Date: 14-03-06
Location: WA, Perth, Tuart Hill
Car: Toyota JZX100 Chaser, Toyota Camry daily rocketship
Trader Rating: (0)
any1 can get fk'd over..

sumthing for sale... sum1 buys it.... what happens from there happens.

fmx - my rb30 motor was built by rajab. i got given receipts for it but again theres not much else i know bout it. i wish i kept my old motor at this point of time haha coz it'd be running by now.

ill probably get my bottom end dropped off sumwhere, and they can check it out and hopefully its just the bearings thats screwed up... im really getting fed up with this.


oh yeah and DEVL is right... i swapped a rajab built bottom end, which according to shane "was in perfect condition" (after doing a leak down etc)... oh well sux to be me at the mo
__________________
"*Power FC of the picture & FC commander is image. Exhibition is 'only the setting data'."
genki is offline  
Old 25-04-07, 21:29   #25
VHELLT
Player
 
VHELLT's Avatar
 
Join Date: 07-08-04
Location: WA, south of river
Car: VLCT wagon dards
Trader Rating: (7)
the recipt is here a mine 4 beens engine says about head and block and whats been doin from rajab
__________________
CORSA CAN Performance 0456159329
VHELLT is offline  
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time now is 10:07.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.