Calais Turbo

ripav8 · 24-11-15, 13:37

I'm not sure if this has been covered before but I'm chasing the biggest injectors I could possibly get in the factory design with factory plug that I can put onto a factory rail. I have seen some 440cc ones but is it possible to get larger ones around 700 to 800cc. Any help would be appreciated also if any one have any lying around or a part number I could purchase some new one on. Thanks In advance

ZOO222 · 24-11-15, 19:42

Also struggled with this. I'd say get gtr upgrade ones because I know for a fact gtr ones are direct fit replacement for standard VL ones. But check what the impedance is. You might have to add a ballast pack (resistors)

ripav8 · 25-11-15, 07:10

Thanks mate I'll have to look into that but think I'm needing bigger tho I'll be happy with around 700cc to 800cc. I'm running aftermarket Ecuador so impedance is not an issue I am wanting engine bay to look as standard as possible so want to run with standard rail and looking Injectors

ZOO222 · 25-11-15, 11:27

I didnt mean GTR upgrade for you i ment the ones that are upgrades for GTRs off ebay.

like these http://www.ebay.com/itm/6-850CC-Fuel...Adf w&vxp=mtr

ripav8 · 25-11-15, 13:41

Ohh thanks for that the size of those would be good but not sure how I would modify them to put a rubber fuel line on like the original brown tops. They look as tho there an oring type so won't fit a standard Vl turbo rail I'll have to go aftermarket rail with those.

ZOO222 · 25-11-15, 13:51

Nah man its same as GTR injectors. You take the O ring off and the rubber spacer part and it should be exact same as standard. Fuel hose and hose clamps go straight on.
I personally ran GTR injectors fitted to a standard rail. As seen in this photo by yellow top GTR 440cc injectors.

ripav8 · 25-11-15, 14:01

Ohh really that's to easy then thanks for that mate that's perfect. That's what I need then. thanks again that's worked out good.

marathon · 10-08-18, 19:38

Quote:

Originally Posted by ripav8

I'm not sure if this has been covered before but I'm chasing the biggest injectors I could possibly get in the factory design with factory plug that I can put onto a factory rail. I have seen some 440cc ones but is it possible to get larger ones around 700 to 800cc. Any help would be appreciated also if any one have any lying around or a part number I could purchase some new one on. Thanks In advance

you need an technician team

24-11-15, 13:37	#1
ripav8 Player Join Date: 03-04-14 Location: Car: Trader Rating: (0)	Rb30 injectors for standard rail I'm not sure if this has been covered before but I'm chasing the biggest injectors I could possibly get in the factory design with factory plug that I can put onto a factory rail. I have seen some 440cc ones but is it possible to get larger ones around 700 to 800cc. Any help would be appreciated also if any one have any lying around or a part number I could purchase some new one on. Thanks In advance

24-11-15, 19:42	#2
ZOO222 Gold Members Join Date: 18-08-10 Location: NZ, Auckland Car: 1988 Vacationer Trader Rating: (0)	Also struggled with this. I'd say get gtr upgrade ones because I know for a fact gtr ones are direct fit replacement for standard VL ones. But check what the impedance is. You might have to add a ballast pack (resistors) __________________ My +T build thread - http://calaisturbo.com.au/showthread.php?t=206948 http://i.imgur.com/XsvWc0Om.jpg

25-11-15, 11:27	#4
ZOO222 Gold Members Join Date: 18-08-10 Location: NZ, Auckland Car: 1988 Vacationer Trader Rating: (0)	I didnt mean GTR upgrade for you i ment the ones that are upgrades for GTRs off ebay. like these http://www.ebay.com/itm/6-850CC-Fuel...Adf w&vxp=mtr __________________ My +T build thread - http://calaisturbo.com.au/showthread.php?t=206948 http://i.imgur.com/XsvWc0Om.jpg .

25-11-15, 13:51	#6
ZOO222 Gold Members Join Date: 18-08-10 Location: NZ, Auckland Car: 1988 Vacationer Trader Rating: (0)	Nah man its same as GTR injectors. You take the O ring off and the rubber spacer part and it should be exact same as standard. Fuel hose and hose clamps go straight on. I personally ran GTR injectors fitted to a standard rail. As seen in this photo by yellow top GTR 440cc injectors. __________________ My +T build thread - http://calaisturbo.com.au/showthread.php?t=206948 http://i.imgur.com/XsvWc0Om.jpg

25-11-15, 07:10	#3
ripav8 Player Join Date: 03-04-14 Location: Car: Trader Rating: (0)	Thanks mate I'll have to look into that but think I'm needing bigger tho I'll be happy with around 700cc to 800cc. I'm running aftermarket Ecuador so impedance is not an issue I am wanting engine bay to look as standard as possible so want to run with standard rail and looking Injectors

25-11-15, 13:41	#5
ripav8 Player Join Date: 03-04-14 Location: Car: Trader Rating: (0)	Ohh thanks for that the size of those would be good but not sure how I would modify them to put a rubber fuel line on like the original brown tops. They look as tho there an oring type so won't fit a standard Vl turbo rail I'll have to go aftermarket rail with those.

25-11-15, 14:01	#7
ripav8 Player Join Date: 03-04-14 Location: Car: Trader Rating: (0)	Ohh really that's to easy then thanks for that mate that's perfect. That's what I need then. thanks again that's worked out good.