Calais Turbo

200series · 11-06-16, 15:14

Hey members,
looking into getting more power out of my rb30e, in a vl. It already has extractors and a mandrel bend exhaust system and shortly I will be installing cold air intake. Now I'm looking into installing a stage 3 chip. Where I think I will get close to 150rwhp which is just what I'm after. Problem is timing MUST be set to factory level, which is 15 degrees, mine is presently at 18. How hard is it to change the timing.
Also if anybody had experience in chipping rb30's please let me know if it is worth while. The seller will send me a tested ECU with the chip already installed for $250. I think this is reasonable. Finally where is the ECU located in a VL
Cheers members
(I would have gone to calaisturbo.com for this question, but they are not as good as the people on this site)

Geniee · 11-06-16, 18:46

"Chipped" says it all really

SIroller · 11-06-16, 20:57

doesnt know where an ecu is and pretty sure thered be heaps of guides on timing an rb here. herp derp. better off without him.

Geniee · 11-06-16, 21:15

"hgahahah DERPPPPP!"

200series · 12-06-16, 15:01

this was on *oldenholden.com* by the way, and yea that chip extra 23 KW !! watch out

BigM22 · 13-06-16, 16:26

wants more power out of a rb30e without advancing the timing..
cant find ecu..

lmao

11-06-16, 15:14	#1
200series Player Join Date: 25-01-15 Location: Perth, Midland Car: VL series200 turbo Trader Rating: (0)	look at what this guy said about calaisturbo...... haha Hey members, looking into getting more power out of my rb30e, in a vl. It already has extractors and a mandrel bend exhaust system and shortly I will be installing cold air intake. Now I'm looking into installing a stage 3 chip. Where I think I will get close to 150rwhp which is just what I'm after. Problem is timing MUST be set to factory level, which is 15 degrees, mine is presently at 18. How hard is it to change the timing. Also if anybody had experience in chipping rb30's please let me know if it is worth while. The seller will send me a tested ECU with the chip already installed for $250. I think this is reasonable. Finally where is the ECU located in a VL Cheers members (I would have gone to calaisturbo.com for this question, but they are not as good as the people on this site)

11-06-16, 18:46	#2
Geniee Player Join Date: 26-01-12 Location: VIC, eastern suburbs Car: Trader Rating: (0)	"Chipped" says it all really __________________ vroooom vroooom cough cough cough tttssstttooooo splutter.......

11-06-16, 20:57	#3
SIroller CAL.415 Join Date: 11-03-07 Location: International, Chapel Street Car: S1 VLC 'CAL415' (sold) SLT MX7 S/W Trader Rating: (52)	doesnt know where an ecu is and pretty sure thered be heaps of guides on timing an rb here. herp derp. better off without him. __________________ Hibernating.

11-06-16, 21:15	#4
Geniee Player Join Date: 26-01-12 Location: VIC, eastern suburbs Car: Trader Rating: (0)	"hgahahah DERPPPPP!" __________________ vroooom vroooom cough cough cough tttssstttooooo splutter....... .

13-06-16, 16:26	#6
BigM22 Booooooooosssssttt! Join Date: 15-08-12 Location: Melbourne, S.E Suburbs Car: 87 Exec, BF Falcon (Daily) Trader Rating: (0)	wants more power out of a rb30e without advancing the timing.. cant find ecu.. lmao __________________ Holden: Australia's Driving Future.... Erm not for much longer

12-06-16, 15:01	#5
200series Player Join Date: 25-01-15 Location: Perth, Midland Car: VL series200 turbo Trader Rating: (0)	this was on oldenholden.com by the way, and yea that chip extra 23 KW !! watch out