Calais Turbo

iwishiwasa6 · 13-12-06, 18:34

title describes everything what ya reckon?

GONE IN 7 · 13-12-06, 18:49

thats a big injector,1700cc?

thats what im using on the race car.

Wizbiki · 13-12-06, 18:53

Do you want to be a bit more specific about what ya reckon we reckon? Cos after a question like that all you'll get is yeah they are a nice big injector. Is that the answer your after?

HSVQUE · 13-12-06, 18:57

you need to decide what power u wanna make and what gear your gonna run then decide on injectors.. the rochester 1000cc's are nice too but u run whatever u need.

iwishiwasa6 · 13-12-06, 19:51

well its a 10 sec street car just want your ideas on what well its like 950 for the indys you got other ideas or a suitable injector to use ???

GONE IN 7 · 13-12-06, 19:53

$950,thats a bit steep,i think there about $120 each

iwishiwasa6 · 13-12-06, 19:56

yeah we looked at them on the net and rrp is 280each and we found them for like 930 for 6 individual price.

pigsy · 13-12-06, 20:00

site sponser is only 110+gst

QIK86 · 13-12-06, 20:28

they're 1600cc. try www.injectorsonline.com for them. as pigsy said, $121 each.

would they be big enough for a methanol setup on a vlt? i'm not looking at doing it, just curious..

duz360 · 13-12-06, 20:32

for a big hp methanol setup you would need 2 sets of 1700cc injectors

VLT87 · 13-12-06, 20:33

for methanol you will be chasing big HP so you will need at least 12 indy blues

to get a good idle with these you really need a sequential injection

PSI086 · 13-12-06, 21:11

Are they too big for a 10sec engine that would see a lot of street use? I presume you can pull enough fuel out of them. I'm just a little concerned about running in a brand spankers engine with them installed and glazing the bores. The car didn't seem to blow much black smoke before it was pulled apart so I presume it should be right.

They are a huge injector for even 350rwkw on pump fuel though

pigsy · 14-12-06, 13:48

Quote:

Originally Posted by PSI086

Are they too big for a 10sec engine that would see a lot of street use? I presume you can pull enough fuel out of them. I'm just a little concerned about running in a brand spankers engine with them installed and glazing the bores. The car didn't seem to blow much black smoke before it was pulled apart so I presume it should be right.

They are a huge injector for even 350rwkw on pump fuel though

870cc seimens would be plenty

BOOSTnWGn · 14-12-06, 14:23

440cc injectors will see 300rwkw in a manual anyway. I wouldn't bother with something that large. Even 550cc denso's would see you a 10.

TroyVK · 17-12-06, 13:32

buy my 870cc injectors
more than enuf fuel for 10s even 9s
pm me if you want them
alot cheaper than $950!!

osk · 17-12-06, 20:41

i paid 120 each for my indy blues

Jet R31 · 20-12-06, 17:00

Get Sard 700cc gtr injectors, about $650 delivered from www.nengun.com
bargain!! and tune up nice
cheers
darren

iwishiwasa6 · 20-12-06, 17:49

my mate spoke to bresciani john reckon 700cc should do the job

13-12-06, 18:34	#1
iwishiwasa6 Player Join Date: 15-10-06 Location: Melbourne, gippsland Car: Trader Rating: (0)	indy blues what ya reckon title describes everything what ya reckon?

13-12-06, 18:49	#2
GONE IN 7 PAY UP SUCKER! Join Date: 08-01-03 Location: Sydney, **** Car: 350z,toyota supra st289 1346hp with more to come. Trader Rating:** (3)	thats a big injector,1700cc? thats what im using on the race car. __________________ GAS MOTORSPORTS 9604 3643

13-12-06, 18:53	#3
Wizbiki Gold Members Join Date: 26-09-03 Location: VIC, eastern suburbs Car: what else Trader Rating: (18)	Do you want to be a bit more specific about what ya reckon we reckon? Cos after a question like that all you'll get is yeah they are a nice big injector. Is that the answer your after? __________________ rb30det

13-12-06, 19:51	#5
iwishiwasa6 Player Join Date: 15-10-06 Location: Melbourne, gippsland Car: Trader Rating: (0)	sorry guys well its a 10 sec street car just want your ideas on what well its like 950 for the indys you got other ideas or a suitable injector to use ???

13-12-06, 19:53	#6
GONE IN 7 PAY UP SUCKER! Join Date: 08-01-03 Location: Sydney, **** Car: 350z,toyota supra st289 1346hp with more to come. Trader Rating:** (3)	$950,thats a bit steep,i think there about $120 each __________________ GAS MOTORSPORTS 9604 3643

13-12-06, 18:57	#4
HSVQUE Nothing to Prove Join Date: 30-01-03 Location: Melbourne, . Car: Holdon Trader Rating: (6)	you need to decide what power u wanna make and what gear your gonna run then decide on injectors.. the rochester 1000cc's are nice too but u run whatever u need.

13-12-06, 19:56	#7
iwishiwasa6 Player Join Date: 15-10-06 Location: Melbourne, gippsland Car: Trader Rating: (0)	thats what we looked at yeah we looked at them on the net and rrp is 280each and we found them for like 930 for 6 individual price.

13-12-06, 20:00	#8
pigsy Gold Members Join Date: 21-09-04 Location: QLD, Gold Coast Car: 508rwhp rb30 more to come on pump fuel Trader Rating: (47)	site sponser is only 110+gst __________________ extreme manifolds 0242628774

13-12-06, 20:28	#9
QIK86 Insert humour here Join Date: 17-07-02 Location: QLD, Maryborough Car: "QIK86" VL Turbo - SOLD :( Trader Rating: (46)	they're 1600cc. try www.injectorsonline.com for them. as pigsy said, $121 each. would they be big enough for a methanol setup on a vlt? i'm not looking at doing it, just curious.. __________________ 24 beers in a case, 24 hours in a day. Coincidence? I think not.

13-12-06, 20:32	#10
duz360 VOTE 1 HORSELL COMMON Join Date: 04-06-04 Location: NSW, wollongong Car: muppet mobile Trader Rating: (79)	for a big hp methanol setup you would need 2 sets of 1700cc injectors __________________ extreme turbo manifolds 0242 628774 used by australia's fastest 7.98@171 BOOSTN

13-12-06, 20:33	#11
VLT87 Player Join Date: 22-05-02 Location: Brisbane, sthside Car: vl race car Trader Rating: (16)	for methanol you will be chasing big HP so you will need at least 12 indy blues to get a good idle with these you really need a sequential injection

13-12-06, 21:11	#12
PSI086 You Can't Polish A Turd Join Date: 28-05-02 Location: TAS, Over there Car: One of those Trader Rating: (10)	Are they too big for a 10sec engine that would see a lot of street use? I presume you can pull enough fuel out of them. I'm just a little concerned about running in a brand spankers engine with them installed and glazing the bores. The car didn't seem to blow much black smoke before it was pulled apart so I presume it should be right. They are a huge injector for even 350rwkw on pump fuel though

14-12-06, 14:23	#14
BOOSTnWGn Want more power !! Join Date: 25-10-03 Location: NSW, Back in Byron Bay Car: WAS: VLT 5spd wagon 401rwhp NOW: Subaru Forester GT 250awhp Trader Rating: (5)	440cc injectors will see 300rwkw in a manual anyway. I wouldn't bother with something that large. Even 550cc denso's would see you a 10. __________________ Australia's first back flips on a trials bike.

17-12-06, 13:32	#15
TroyVK Player Join Date: 15-11-02 Location: QLD, Gold Coast Car: 93RZ Single Turbo Supra, 94GZ Roller, Toyota Paseo Trader Rating: (32)	buy my 870cc injectors more than enuf fuel for 10s even 9s pm me if you want them alot cheaper than $950!!

17-12-06, 20:41	#16
osk Osk Racing... Join Date: 22-02-03 Location: Brisbane, Cleveland Car: VL Calais Turbo Trader Rating: (22)	i paid 120 each for my indy blues __________________ '''DFECTV''' " OSK RACE FABRICATIONS" COOL-IT Performance

20-12-06, 17:00	#17
Jet R31 10.21@140.89 Join Date: 20-09-04 Location: SA, Adelaide Car: r31 skyline lego block Trader Rating: (5)	Get Sard 700cc gtr injectors, about $650 delivered from www.nengun.com bargain!! and tune up nice cheers darren

20-12-06, 17:49	#18
iwishiwasa6 Player Join Date: 15-10-06 Location: Melbourne, gippsland Car: Trader Rating: (0)	hey my mate spoke to bresciani john reckon 700cc should do the job