View Single Post
Old 21-12-10, 06:39   #8
xctmnt8's Avatar
Join Date: 07-03-05
Location: Adelaide, Northern Suburbs
Car: Starship Voyager
Trader Rating: (3)
Originally Posted by mooe_13 View Post
Sounds Like a happy Dyno, Have a very similer set up but running a slightly bigger crow cam and vn headed and pushed close to 200 kw
Could have been, my mate took it in oneday.
Was a good setup and very streetable. Use to light the tyres at 60 with 3.08 gears.
Basic run down -
Full balance & blueprint, linish crank (had some movement prior to rebuild)
Slight bore, +30
Flat top pistons, 'x' rods
286 Crane Cam, W Gold Roller Rockers, Crane lifters
Decent valves and valve springs
Big Valve Heads, radically ported, flowed something like 460HP on the bench.
Edelbrock performer inlet manifold, 1 inch spacer plate
10.1 Comp
Holley 650DP, then upgraded to a 750DP
Run by a Holley Blue fuel pump
With a Trimatic & 3500 Dominator Eliminator stall.

I do miss it but after building it and working in the city, $200+ a week fuel bills were killing me.
xctmnt8 is offline   Reply With Quote