View Single Post
Old 15-11-05, 16:28   #7
orange_vl
spray painter
 
orange_vl's Avatar
 
Join Date: 18-05-04
Location: NSW, mid north coast
Car: vs commodore, vl commodore
Trader Rating: (6)
Send a message via MSN to orange_vl
wheel can be any size ya want 13 to 22 inch, as long as the width isnt 2 inch bigger then standard and the offset isnt 1 inch either way wheels also have to travel in the same line as standard

seat belts are ok use high tensile bolts.

brakes have to be bigger or better then vt brakes

blow off valve and wastegate has to be plumbed back

guages on bonnet are ok not sure about chrome cups
blow a balloon up to the dimeter of 165 cm, opke that around the interior,if the balloon doesnt touch your guages they are ok and guages cannot be in line of view

noise has to be under 90db

ride height no lower then 100mm on LOWEST point of car

intercooler is ok

pod filter is ok but has to be mounted or tied down or screwed down

lockdiff or mimidspools are not ok

battery in boot is ok BUT had to be either: vented or sealed unit, e.g no screw things on the top

surge tank not sure of

fuel cell in boot is ok

not sure about MPH speedo

these are the things i went and asked about
orange_vl is offline   Reply With Quote