View Full Version : GKTECH 3.0mm STAINLESS STEEL HIGH MOUNT MANIFOLDS - ONLY $249!! INTRODUCTORY OFFER!!


gktech
26-10-06, 17:50
As above we have some brand new 3.0mm high mount T3 stainless steel manifolds in stock. (external gate - 38mm)

50 are in stock ready to go and we're offering them for a short time for only $249 + $35 for freight to anywhere in Australia via registered post with full insurance.

You can order on our website here: http://www.gktech.com.au/products/?ID=121

cheers,
Greg Kruse - gktech.com.au

ExecTurbo
27-10-06, 00:54
Sold.

gktech
27-10-06, 12:08
Still 49 left :) lol

Greg

killaniss
27-10-06, 13:23
pics?

gktech
27-10-06, 16:30
I'll get them up as soon as possible (our server is playing up)

cheers,
Greg

hypobt1
27-10-06, 18:07
intrested pics please

gktech
29-10-06, 20:21
The server is still playing up and I'm leaving in the morning for SEMA in Las Vegas. I'll attend to this problem as soon as I get settled (should be the early hours of Tuesday)

Sorry for the delays :(

Greg

killaniss
02-11-06, 11:46
how you going with the pics?

ExecTurbo
02-11-06, 18:55
If you read the previous post... you'll see how he's going... This Coming Tuesday...

VLHERO
02-11-06, 19:20
If you read the previous post... you'll see how he's going... This Coming Tuesday...
Which would have been the 31st of October if you read his post, 2 days ago.

Gabzsta
03-11-06, 23:28
Hey champ can u please get some pics up when u get the chance, and also would u be able to strengthen these manifolds to suit bigger and heavier turbos? Im waiting on pics have cash ready!

gktech
06-11-06, 18:54
Sorry for the delays guys. I just got back from the SEMA trade show yesterday and I couldn't view the forum from my laptop for some reason.

I'm back now and all is back to normal.

You can order the manifolds from our website here: http://www.gktech.com.au/products/?ID=121


Here's some pictures of the manifolds:

http://www.gktech.com.au/gallery/products/DSC01068.jpg

http://www.gktech.com.au/gallery/products/DSC01066.jpg

http://www.gktech.com.au/gallery/products/DSC01067.jpg

http://www.gktech.com.au/gallery/products/DSC00872.jpg

http://www.gktech.com.au/gallery/products/DSC00873.jpg

http://www.gktech.com.au/gallery/products/DSC00874.jpg

cheers and sorry again for the delays.

Greg

AFG-WPN
07-11-06, 01:04
greg, you finally got the mainfolds after all the talks we had haha :p

put me down for one, but ill pay a deposit in the coming week (birthday coming so money will be there lol)

cheers,

Baset.


p.s can you get any cheap wastegates?

gktech
07-11-06, 08:36
greg, you finally got the mainfolds after all the talks we had haha :p

put me down for one, but ill pay a deposit in the coming week (birthday coming so money will be there lol)

cheers,

Baset.


p.s can you get any cheap wastegates?

We've got a Tial style 38mm wastegate that we're testing at the moment. If all goes well they will be quite cheap :)

P.S We've still got 40+ left so next week won't be a problem.

cheers,
Greg

E-Z
07-11-06, 18:38
id be keen in a few weeks too, they look like ebays monstA manifolds..

dan_k
07-11-06, 22:48
just flood the market with made in china!! woohooO!

REEHAB
07-11-06, 22:51
just flood the market with made in china!! woohooO!

If there good quallity made products, at good prices.. what does it matter where there made??...

dan_k
07-11-06, 22:59
quality products....yeah just like the intercooler i bought lol. quality doesnt come cheap!

Mz_HoLdEn
08-11-06, 08:35
just flood the market with made in china!! woohooO!
If you've got nothing useful to say then don't post at all. I have seen one of these manifolds in person and they are of a very high quality. It has been proven time and time again quality can come cheap you just gotta know where to find it.

gktech
08-11-06, 11:05
These are made in a factory which I and my business partner from New York city have control over (in terms of quality assurance).

I spend a few months each year at the factory and my business partner Tom, spends around 9 months a year between this factory and the factory that manufactures the aluminium piping for us.

As seen with our intercooler kits, the chinese can certainly manufacture good quality items but at the same time you don't pay for Australian labor or material costs.

These manifolds come with a 1 year replacement warranty through us (GK Technologies)

cheers,
Greg

jcs_87
09-11-06, 06:56
pm sent

gktech
09-11-06, 09:57
pm sent

We didn't receive a PM from you???

gktech
13-11-06, 16:08
Keep the orders coming guys :)

stumpy
13-11-06, 17:42
may be keen in a few weeks .. can you have them internal gated? as i was thinking of a gt 35/40r or something internal gate.

gktech
13-11-06, 18:01
may be keen in a few weeks .. can you have them internal gated? as i was thinking of a gt 35/40r or something internal gate.

We've only got this batch of 50, after this we won't be doing another batch for a few months.

With a turbo of that size external gate it really recomended.

greg

vhr32
13-11-06, 18:58
Do you do RB26 ones? T3 or T4 flange?

Matt

fatz
14-11-06, 09:20
order placed

payment sent

and email confirmation of paymnet sent

looking forward to giving one of these a bash

pete

bdrftn
14-11-06, 10:39
these look exactly the same as the monsta/jspec manifolds...??

not trying to ruin your thread or be a smart ass, just wondering.

have you tested these manifolds on a high powered vlt?

gktech
14-11-06, 15:21
these look exactly the same as the monsta/jspec manifolds...??

not trying to ruin your thread or be a smart ass, just wondering.

have you tested these manifolds on a high powered vlt?

I spend a few months each year in China/Taiwan working on new products.

They sure do look similiar but we back all of our products up with a 1 year replacement warranty and of course ours are cheapest as we not only manufacture these but also wholesale and retail.


Do you do RB26 ones? T3 or T4 flange?

Matt

Unfortunately at this stage we've only got SR20 and RB30 manifolds available.

Greg

fatz
20-11-06, 18:06
all arrive very quickly

looks good ill have it on in a week adn see how she goes

cheers
pete

killaniss
30-11-06, 11:56
have you still got some

gktech
30-11-06, 14:16
have you still got some

We've got plenty in stock ready to go!!

killaniss
30-11-06, 20:58
cool hopefully ill have the money in the next couple of weeks

Nusk
03-12-06, 12:33
can you run a turbo with an Internal Wastegate on these manifolds?

like can you just block the hole for the wastegate on the manifold?

gktech
04-12-06, 05:54
can you run a turbo with an Internal Wastegate on these manifolds?

like can you just block the hole for the wastegate on the manifold?

Technically you could but it would be best to actually weld up the hole and make it nice and smooth inside :)

Greg

gktech
12-12-06, 16:54
STOCK NEEDS TO CLEAR TO MAKE WAY FOR NEW ITEMS!!!

$199 OUT THEY GO!!!

phun
13-12-06, 08:13
pm sent :)

gktech
13-12-06, 19:36
pm sent :)

And replied...

Greg

dceptv
13-12-06, 20:30
Will you be doing anything for ppl with the T04Z at all?

gktech
13-12-06, 20:44
Will you be doing anything for ppl with the T04Z at all?

Unfortunately not :(

vlmad_05
13-12-06, 23:26
hi so will these be suitable for t3 hiflow and what is the gains of having this item thanx

gktech
14-12-06, 06:14
hi so will these be suitable for t3 hiflow and what is the gains of having this item thanx

Yes it will suit any T3.

The advantage of having a high mount turbo setup is that you are able to fit a bigger turbo than you would be able to on the stock manifold.

Greg

GOT_POWR
14-12-06, 14:29
with the warrenty, would i be able to cut the pipe were the flange for external wastegate is and weld a v band style flange on, cos i hav a 48mm progate and i dont really want to sell it cos its brand new.

**** it for $234 its worth is any way. ill grab one off ya cobber

gktech
14-12-06, 16:57
with the warrenty, would i be able to cut the pipe were the flange for external wastegate is and weld a v band style flange on, cos i hav a 48mm progate and i dont really want to sell it cos its brand new.

**** it for $234 its worth is any way. ill grab one off ya cobber

We stand by all our products but when you start modifying them it's really hard to say whether they will last or not (as re-welding anything in stainless steel will weaken it). Obviously if another part of the manifolds cracks and it's got nothing to do with the modifications that you've done then the warranty still stands..

That said, we've NEVER had a manifold crack and we've quite a number of them (i'm using one on my R32 4 door track car with a Tomei built SR20 motor which should put out 260rwkw's+ once it's re-tuned) Within 20 minutes of 37 degree weather at Springnats 06' bouncing off the rev limiter it turned blue :)

Let me know if there's anything else I can help you with.

cheers,
Greg

dceptv
14-12-06, 17:35
Unfortunately not :(

Thanks anyways dude!

Arie

gktech
20-12-06, 16:29
Still in stock ready to go!!

gktech
10-01-07, 09:52
$199 guys!! :)

boostdVL
10-01-07, 13:46
Is that single pipe for an external wastegate?

gktech
10-01-07, 18:57
Is that single pipe for an external wastegate?

It is indeed.

whizzn
12-01-07, 00:48
money sent and you have a PM :)

boostdVL
25-01-07, 10:37
I'm keen to see some pictures of people with this manifold.
Greg, any chance of getting a pipe made up with the no holes intercooler kit to suit the high mount? Or would i have to get a workshop to do one?

Fat 3L
27-01-07, 10:36
any1 got a pic of this manifold on their car??

gktech
27-01-07, 15:18
I'm keen to see some pictures of people with this manifold.
Greg, any chance of getting a pipe made up with the no holes intercooler kit to suit the high mount? Or would i have to get a workshop to do one?

It's not really possible as it depends on the turbo that's being used.

There's plenty of pictures on the net of people using these manifolds.

Greg

MARMO.
27-01-07, 17:17
not a gktech one but its the same

http://i1.tinypic.com/2ng6jx4.jpg

http://i1.tinypic.com/48pahqa.jpg

http://i11.tinypic.com/2m7gpkk.jpg

http://i14.tinypic.com/33o5h21.jpg



first turbo is a r32 one, the bigger one is a ebay t70. hope that helps u

gktech
27-01-07, 17:20
Thanks mate :)

Vlcal25
29-01-07, 11:11
do u sell low mount manifolds and for how much? thanks

gktech
29-01-07, 11:14
do u sell low mount manifolds and for how much? thanks

We only have these high mount manifolds which are being cleared out.

Greg

REDNUT VL
01-02-07, 13:13
how welldo the throttle cables go with the high mount,? and how hard is it to make stainless as my old man works with piping? and is it possible to run 3inch piping with them as im using the std mani... and they still 199? pm me plz asap as ill have one. lol i forgot plz tell me they can run a gt35r and tial 38mm gate
cheers
shaun

gktech
01-02-07, 16:12
how welldo the throttle cables go with the high mount,? and how hard is it to make stainless as my old man works with piping? and is it possible to run 3inch piping with them as im using the std mani... and they still 199? pm me plz asap as ill have one. lol i forgot plz tell me they can run a gt35r and tial 38mm gate
cheers
shaun

It is best to move the throttle cable away if possible or protect it from the immense heat from the turbo.

Make Stainless???

Run 3" piping for what? Intake, turbo outlet, dump pipe?

The price is $199.

You can run a GT35r and 38mm wastegate without any problems on this manifold.

Greg

REDNUT VL
01-02-07, 16:29
lol sorry mate wasnt the clearest, at the moment i have three inch diam stainless running all round, (intake and cooler), its the diameter of the inlet piping to the std mani that im worried about with clearances and stuff. how would i shield the throttle cabling? would a heat shile/ bag help

cheers

shaun

MARMO.
01-02-07, 21:29
i ran my thral cable around the front of the engine so it doesnt get any heat. i melted it running it the std way.

i haev 2.5inch cooelr piping with this manifold, post a pic up of ur current set up and i will tell u weither it will fit or not or the "cold" side of the cooler piping will need to be reworked. the "hot" side of the cooler piping should be fine, just cut and angle changed of where it connects to the turbo

REDNUT VL
02-02-07, 15:43
yeah well i might change to 2.5" piping. my old man can rework the piping so it should be ok... thanks marmo, and ill be purchasing one shortly if there is still stock.

dexlab
03-02-07, 19:22
cool i just orderd mine.can not wait

ICUL8R
04-02-07, 14:50
i got mine thursday, well built, quite solid and heavy, haha only thing is the quality sticker leaves a sticky mark that i had to scrub off, but thats my only complaint:P

Dazza102
04-02-07, 15:16
i got mine thursday, well built, quite solid and heavy, haha only thing is the quality sticker leaves a sticky mark that i had to scrub off, but thats my only complaint:P

next time if you have that yucky left over sticky crap use wd40 - removes it in a jiffy ;)

gktech
04-02-07, 16:49
i got mine thursday, well built, quite solid and heavy, haha only thing is the quality sticker leaves a sticky mark that i had to scrub off, but thats my only complaint:P

Next time I'll make sure they don't check the quality after completion.. lol (joking of course).

I'm glad to hear that it arrived safely. If there's anything else that I can help you with, please let me know.

Greg

dexlab
15-02-07, 19:01
just want to know when i get mine.payed but got stuff all

gktech
16-02-07, 07:27
just want to know when i get mine.payed but got stuff all

Why don't you send an email or give us a call?

What is your name?

When did you place the order?

When did you make payment?

How did you make payment?

This will help us to determine who you are and where your order is. We have no outstanding orders for RB30 manifolds so all have been sent out!!

cheers,
Greg

dexlab
17-02-07, 22:25
dude dont worry.if a fu#k wit.just got it then...
LOVE IT SO WELL MADE>>>>>

gktech
19-02-07, 18:05
dude dont worry.if a fu#k wit.just got it then...
LOVE IT SO WELL MADE>>>>>

Thanks, great to hear :)

gktech
02-03-07, 17:06
Plenty in stock ready to go guys!! :)

ky-ified
11-03-07, 20:00
greg do u still have the high mount manifolds and how much are they mate

gktech
12-03-07, 18:28
greg do u still have the high mount manifolds and how much are they mate

In stock ready to go.

They are $199 + $35 for freight to anywhere in Australia.

You can order on our website or pickup from the warehouse in Hoppers Crossing, Victoria.

Greg

stokowagn
26-03-07, 09:14
Hey just checking. I have a Tial 38mm wastegate. Will it fit straight on? Are they flanged the same?
Thanks.

gktech
29-03-07, 13:05
Hey just checking. I have a Tial 38mm wastegate. Will it fit straight on? Are they flanged the same?
Thanks.

As far as I know they are the same flange..

Maybe some one else can clarify who has this wastegate?

Greg

JBA05
29-03-07, 13:33
hey so do u make these for the rb25det and if so how much thanks jba05..

gktech
29-03-07, 16:37
hey so do u make these for the rb25det and if so how much thanks jba05..

Unfortunatley we only have these for the SR20's and the RB30's.

Greg

vhr32
03-04-07, 08:56
I'm after one of these Greg, I've just placed an order through the website.

Thanks!

bradshaw7
06-04-07, 19:02
have u got these to fit rb20

Bouras
06-04-07, 22:26
so if i got one one these, pretty much all i need to change is cooler piping, dump pipe and throttle cables, is there any majour changes i need to make??

VLT 88
07-04-07, 00:25
oil/water lines...

gktech
07-04-07, 10:27
have u got these to fit rb20

Unfortunately not. We've only got them for the RB30's and SR20's at this stage.

Greg

vhr32
13-04-07, 17:44
I'm after one of these Greg, I've just placed an order through the website.
Thanks!

Got it today, thanks very much! Hope it all fits up ok.
Matt

bdrftn
13-04-07, 18:38
As far as I know they are the same flange..

Maybe some one else can clarify who has this wastegate?

Greg

TIAL wastegates have a v/band flange so modification to manifold is required.

gktech
16-04-07, 10:59
TIAL wastegates have a v/band flange so modification to manifold is required.

Thanks for clearing that up :)

VLT 88
17-04-07, 19:18
got mine today... will let you know how it goes when i get it on

ky-ified
24-04-07, 10:52
just ordered 1 through ya website n the missus is on her way down the street to depsit $$$$
reguards kyle

gktech
24-04-07, 11:38
just ordered 1 through ya website n the missus is on her way down the street to depsit $$$$
reguards kyle


Thanks for the quick payment.

Your order will be sent out via Registered post with full insurance today. You should get it at the end of the week or there abouts.

Please let me know when it arrives.

cheers,
Greg

ky-ified
24-04-07, 12:07
Thanks for the quick payment.

Your order will be sent out via Registered post with full insurance today. You should get it at the end of the week or there abouts.

Please let me know when it arrives.

cheers,
Greg

will do thanks mate

lil_timmy
24-04-07, 18:53
TIAL wastegates have a v/band flange so modification to manifold is required.

Wrong. They also come in normal bolt flange. Heres my the exact wastegate my brother questioned about. But its fine now, high mount is not needed.

http://i11.tinypic.com/33m24uf.jpg

ky-ified
26-04-07, 16:53
greg
just recieved my manifold and am very happy with the quality....thanks heaps

kyle

bdrftn
27-04-07, 02:36
Wrong. They also come in normal bolt flange. Heres my the exact wastegate my brother questioned about. But its fine now, high mount is not needed.


My bad then.
atleast we know they come in both flange types now :)

gktech
27-04-07, 10:09
greg
just recieved my manifold and am very happy with the quality....thanks heaps

kyle

Great to hear mate. Pleasure doing business with you :)

gktech
27-05-07, 11:15
In stock ready to ship (or pickup from our warehouse)

87vl
25-06-07, 17:08
Hey i will definately order one mate and pickup would be easier as im just down the road from u. also came and picked up a Viper alarm from u a while back.

gktech
30-06-07, 14:27
Only 2 left guys!!

allmtr
12-03-08, 20:13
What ever happened to these?

Can't get any more???

gktech
16-03-08, 17:02
What ever happened to these?

Can't get any more???

We need to manufacture at a minimum, 50 pieces.

Unfortunately it wasn't a feasible item for us as the stock just sat on the shelves far too long :(

UNONT2
12-04-08, 15:17
so no more greg?????

SIKVLT
12-04-08, 16:35
I'd be keen for one to if available

gktech
16-04-08, 09:36
These are not going to be available again unfortunately. Sorry guys.