View Full Version : Cheap Performance Injectors, pumps, regs, fuel rails


injectors
13-01-06, 12:02
We have been sponsoring this site for a few weeks now and we have had an awesome response so far. I thought I had better open up a thread to show you what we have and give you all an opportunity to ask questions if you need to.

Everything comes with a min 6 month warranty and a tax invoice.

These prices are not specials... this is the price all the time! All prices include GST

Performance Fuel Injectors

305cc Bosch 'Red Top' $55.00 each (motorsport)
335cc Bosch EV6 $82.50 each
370cc Bosch EV6 $82.50 each (standard for Holden supercharged)
440cc Bosch 'Green Top' $82.50 each (motorsport)
570cc Siemens $110.00 each (low impedance)
570cc Siemens $110.00 each (high impedance)
610cc Siemens Deca $121.00 each (high impedance)
660cc Rochester $93.50 each
750cc Siemens $110.00 each
870cc Siemens $110.00 each
1000cc Rochester $110.00 each
1600cc Bosch $110.00 each (the same as Indy Blue's)

Fuel Rail Conversion Kits

RB30/RB30T $264

Fuel Pumps

Bosch 070 inline pump for VL $159.50
Non Gen 070 still a great pump, 6 months warranty, $115.50
Delphi VL primer (in tank) $66.00

Motorsport 040 internal pump 400hp @ 2.5 - 3.5 bar $242.00
Motorsport 910 external 450hp @ 73.5psi $181.50
Motorsport 044 external pump 700hp - 800hp @ 73.5psi $297

Pressure Regulators

Malpassi adjustable, non turbo $121.00
Malpassi EFI turbo up to 15psi $143.00
Malpassi EFI turbo over 15 psi $165.00

Air Flow Meter

Bosch Air Flow Meter for VL #0 280 212 008 $203.50

Crank Angle Sensor

Crank Angle Sensor for VL $88.00


All items listed are in stock. Prices do not cover delivery which in most cases will be $11 express (more for bulk orders) and never more than $22 after which we will wear the cost. If you are in Melbourne you can pick up and save on freight.

All items are listed on our website with photo's so you can check them out first. You can also pay for everything via our secure credit card facility on the site.

Tell me if there is anything else you guys would like and I will try to source them at the right price

timeout
18-01-06, 12:17
660cc Rochester $93.50 each
will this injector fit in the standed fuel rail???
and also do you guys sell surge tanks??

QIK86
18-01-06, 12:43
660cc Rochester $93.50 each
will this injector fit in the standed fuel rail???
no they won't, as they are a 14mm o ring type injector. however they also sell the fuel rail conversion kits to suit.

i have dealt with these guys and their prices are fantastic and their service is second to none. i'd recommend them to anyone looking for a fuel system upgrade.

timeout
18-01-06, 13:46
so do they sell anythink that will fit on the stock fuel rail??? and if so what do they have around 650cc thanks for any help.

QIK86
18-01-06, 14:23
going by their website, they only sell std VLT injectors in the hose tail type.

my suggestion would be to just buy the fuel rail kit as well..

injectors
18-01-06, 15:06
With the VLT, the only upgrade we do is with the fuel rail upgrade kit and changing to 14mm o-ring injectors. This also makes it easier to upgrade (all the way up to 1600cc) if that's where you want to go.

87_DeVL
18-01-06, 19:20
hi mate, could you please explain to me the difference of high and low impedance injectors.

cheers!

/im currently looking at ones to go in one of your fuel rails, but vl turbo ones are low impedance, does that mean i have to get low impedance injectors?

//whats the max cc flow rate a stock vlt ecu can handle?

injectors
19-01-06, 10:14
hi mate, could you please explain to me the difference of high and low impedance injectors.

cheers!

/im currently looking at ones to go in one of your fuel rails, but vl turbo ones are low impedance, does that mean i have to get low impedance injectors?

//whats the max cc flow rate a stock vlt ecu can handle?

Hi there,

Impedance is another word for resistance so low impedance injectors normally has a resistance of around 3 ohms and a high impedance injector has a resistance around 15 ohms.

As a rule, high impedance injectors will work fine with a low resistance set up on your car but they don't work the other way around. Low resistance injectors do not go with a high resistance setup.

All injectors open and close very fast and the opening/closing time is measured in milli seconds. The operating difference is that low resistance injectors will stay open a fraction longer (peak and hold) than their high ohms mates. This makes lower impedance injectors better suited for high performance applications.

As far as the max cc flow rate on the stock VLT ec, I don't know. You may be better off asking a tuner or someone who has tried it out on a dyno.

I hope this helps,

Simon

87_DeVL
19-01-06, 11:38
cheers

blue_vl_t
19-01-06, 19:26
interester in around a 800cc injector, to put in my vl turbo, can you host some pictures of the fuel rail that you sell to suit?

MARMO.
19-01-06, 19:58
geez the cas are cheep cant even get them that cheap trade price, what brand are they?


also with the bosch 1600cc is it posible to get them to idle prefect on a vlt on cusom computer..?

injectors
20-01-06, 13:21
Hey blue_vl_t here are some pics of the VLT fuel rail that comes with the conversion kit (see attachment). They also come with full instructions and are very easy to install.

The 750cc and 870cc are both SIEMENS injectors and you would have to ask someone who is good at tuning the cars about the 1600cc at idle.

BlackVL
23-01-06, 09:27
Is it simply a matter of connecting a fitting upto the threaded ends on the custom fuel rails ?

injectors
23-01-06, 14:16
Is it simply a matter of connecting a fitting upto the threaded ends on the custom fuel rails ?

Yes, you get an '8' fitting on the inlet side and a 3/8 barb fitting on the return side. They come with the kit.

87VLT
30-01-06, 17:43
440cc Bosch 'Green Top' $82.50 each , will they fit on the standard fuel rail if not how much extra for a fuel rail conversion kit

phantom_t
01-02-06, 21:45
hey, just wondering if using a high output fuel pump, does it use more fuel or just supplies more fuel to the reg.

would it be better to go with a 910 pump or just the equivalent of the vlt one.

are the malpassi regs that are for setups up to 15psi, the 1:1 ratios thanks

blue_vl_t
11-02-06, 18:02
with a larger pump you will just have more fuel returning to your tank, so no your fuel consumption will remain the same

TroyVK
12-02-06, 11:55
Simon is great to deal with and very helpful
ive bought some 870cc siemans injectors thru him and im about to buy his 2J conversion fuel rail
cant go wrong
cheers
Troy

SuperRy
13-02-06, 10:47
Does anyone have a contact # for these guys?
I'm trying to get a CAS as soon as possible and there is no contact# on their site.

gktech
21-02-06, 20:33
Can you please quote me up on 4x Bosch ND 195500-1370 (tan tops)

Please PM me the price.

Thanks

vlturrrbo
08-03-06, 14:35
Yes, you get an '8' fitting on the inlet side and a 3/8 barb fitting on the return side. They come with the kit.
i need a complete package-around 700cc,rail kit & o44 fuel pumpcan you pm me a price asap as im replacing in 3 weeks thanx steve

injectors
29-03-06, 08:14
FUEL SYSTEM UPGRADE SPECIAL

If you buy:
6 x Injectors from 570cc - 1600cc
1 x Fuel Rail Conversion Kit
1 x Bosch 044 fuel pump

We will mark the injectors down from $100 + gst to $90 + gst each.
The fuel rail kit goes from $240 + gst to $210 + gst
The fuel pump comes down from $270 + gst to $250 + gst.

The first 10 people will get this offer, after that, everthing will go back to normal prices.

All up it will be $1000 + gst for the lot!

If you buy 660cc injectors it will be even cheaper as we will do them for $80 + gst each.

Express Post delivery to anywhere in Australia is $11. You can also pick up to save on delivery fee.

KIL-351
29-03-06, 10:11
damn!! i should have waited a week!!!!!!!!!! still i shouldnt complain, great price and awesome service!

LTHLRB
07-04-06, 20:26
hey do u supply straight fit injectors for the rb25 motor?

injectors
11-04-06, 10:09
hey do u supply straight fit injectors for the rb25 motor?
Sorry, we don't supply the injectors that drop straight in but we supply a fuel rail conversion kit so you can change to 14mm top o-ring injectors.

GTS005
12-04-06, 15:19
seller - injectors

can i please get some more info and maybe a picture of the
Malpassi EFI turbo over 15 psi $165.00 item

max psi it can push ?
does it come as a kit with every thing you need?
and maybe with an instalation guide ?

thanks. - Ricko.

251NFL
06-06-06, 20:01
hey mate will the 870cc Siemens fit a wrx? do u have the rail conversition kit for the wrx?

slepar
17-06-06, 13:21
hey mate do u seel injectors to suit cordia turbos if not would u know who does?

VlCrZy69
20-06-06, 14:44
URGENT

Hey mate need a malpassi fuel reg today. Please call me 0415 158 777. i will come pick it up. cheers

Anyone Got A Number For This Bloke???

monk
01-07-06, 13:41
yeah nah no number,
been trying to contact this guy everyday and no response cmon mate return pms

SirGeo
07-07-06, 18:32
yeah nah no number,
been trying to contact this guy everyday and no response cmon mate return pms


Guy's he isn't a regular on the forums. If you need to contact him urgently i'd suggest going to his website www.injectorsonline.com and using the contact link.

Or email him directly at info@injectorsonline.com and make sure you put the enquiry was from this site and i'm sure he will look after you ;)

Steve.

MaZzA
13-07-06, 02:50
do u still have stock on the cas?