The new Master Power Turbos shipment has arrived!

We now have the following turbos in stock ready to be shipped out:

- T04E T53: $1,045.00 inc GST
This is a similar sized turbo to a Garrett GT3071 and is rated at 450hp.
Exhaust housing sizes available: 0.63


-T04E 60-1: $1,045.00 inc GST
This has the same sized front wheel as a MP37 but the rear wheel 12mm smaller. It has a similar sized rear wheel to what is in the GT2871R and is rated at 550hp.
Exhaust housing sizes available: 0.48

-MP37: $1,144.00 inc GST
This is a similar sized turbo to a Garrett GT3076 and is rated at 600hp.
Exhaust housing sizes available: 0.70


-S60: $1,144.00 inc GST
This is a similar sized turbo to a Garrett GT3076 (but larger front wheel than a MP37) and is rated at 600hp.
Exhaust housing sizes available: 0.50 & 0.63

-T60: $1,144.00 inc GST
This is a similar sized turbo to a Garrett GT3582 and is rated at 600hp.
Exhaust housing sizes available: 0.84 & 1.00

-T64: $1,177.00 inc GST
This is a similar sized turbo to a Garrett T04Z and is rated at 700hp.
Exhaust housing sizes available: 0.84 & 1.00

-T70: $1,210.00 inc GST
This turbo has a 69.1mm front wheel which is larger than a T04Z but has the same sized rear wheel as a S60 and is rated to 700hp.
Exhaust housing sizes available: 0.68, 0.84 & 0.96

-T76: $1,210.00 inc GST
This turbo has a 76.5mm front wheel with the same sized rear wheel as the T70 and is rated at 800hp.
Exhaust housing sizes available: 0.50 & 0.96

-GT4598: $1,485.00 inc GST
Rated at 700hp
Exhaust housing sizes available: 1.05

-MP42: $1,485.00 inc GST
Rated at 900hp
Exhaust housing sizes available: 1.22

-GT4503: $1,485.00 inc GST
Rated at 1000hp
Exhaust housing sizes available: 1.05

Shipping prices:
Please either PM or email sales[at]expressparts.com.au for a quote for postage. I will require your postcode for the quote.

General Info:
- These turbos are NOT Chinese, never have been or will be;
- The Chinese have produced a turbo 'XS Power' (or similar names) which is a copy of the Master Power turbos. The Master Power turbos are high quality and are comparable to Garrett's thrust bearing range.
- Master Power Turbos is a Brazilian company established in 1966;
- These turbos use a 360 degree thrust bearing turbo;
- Oil lubricated (not water cooled);
- In 2004 they gained ISO 9001:2000 certification;
- All turbos come with a 12 month manufacturer’s warranty;
- These turbos are only relatively new to Australia but have been used in other parts of the world including the USA for many years with great success;
- Express Parts (Qld) Pty Ltd is the Sole Australian Distributor for Master Power.

Some of the recent results with these turbos include:
- 565rwhp (27psi) on a RB25/30 running a GT4598 (rated at 700hp). This car ran a 10 second quarter mile with this turbo and less power.
- 514rwhp (13psi) on a LS1 turbo kit running a modified version of a T70 (rated at 700hp). I’ll have more information available shortly regarding these bolt on LS1 kits.
- 400rwhp (20psi) on a RB25 running a MP37 (rated at 600hp). This is on Robby Mounfield's R32 drift car. Hits full boost at 4400rpm.
Go Pro Automotive is running this turbo in their new drift car which Eugine Arendsen is driving. He’s running a T60 (0.84 A/R rated at 600hp) on a RB25/30 setup in a R32 Skyline. I’ll have more information once this car has been tuned.

More results to come shortly.

Wastegates:

- Tial 44mm wastegate: $639.95 inc GST

Turbo & Wastegate package - Buy any of the above turbos and get the wastegates for:

- Tial 44mm wastegate: $605 inc GST

Further details of the Master Power turbos can be found on our website http://www.expressparts.com.au/master_power.asp

Any further questions please post in here, PM or email me at sales[at]expressparts.com.au

Trade enquiries welcome.

http://i22.photobucket.com/albums/b338/will_s15/P1060495-1.jpg
http://i22.photobucket.com/albums/b338/will_s15/forumpicMPturbo-1.jpg

Cheers

Will

when would you expect the t76 to come on on a 25/30 with stock head and small cams?

when would you expect the t76 to come on on a 25/30 with stock head and small cams?

This is the first time I've brought these ones in so I can't give you an accurate figure.

We've had a GT4598 on a RB25/30 start to pull around 3800-4000rpm. The exhaust wheel on the T76's are 13mm smaller (as well as a smaller housing on the T76) so I can't be sure exactly how much sooner it will come on.

what would you recomend if i were chasing 270rwkw but using the stoch manifold that is externaly gated, i would like it to start too spool around 2500-2800 looking for something responsive. cheers.

whats the difference with the ( T04E T53: $1,045.00 inc GST ) and Master Power T53 450hp which is $836 on your web site?

---------- Post added 15-04-10 at 16:51 ----------

infact why are all your turbos cheaper on your website?

whats the difference with the ( T04E T53: $1,045.00 inc GST ) and Master Power T53 450hp which is $836 on your web site?

---------- Post added 15-04-10 at 16:51 ----------

infact why are all your turbos cheaper on your website?


This is actually an old post now. The new post for the Master Power turbos is here http://www.calaisturbo.com.au/showthread.php?t=193594 . Both the above turbos are exactly the same. I've just renamed it to T53 to make it easier for customers.

The reason for the price drop is that I've been able to negotiate better rates from Master Power due to the increased volume I'm ordering. I've simply reflected that in the prices that I sell them for. This only came into effect with my latest shipment that arrived.

lol ill check the dates next time thanks.

Bit of a thread dig . Tried getting on express parts site . Anyone know of any other Master power turbo distributors ? Thanks

I think he was the sole distributor at that time. It seems like he doesn't do it anymore.

Im selling mine if you're after one.

http://www.gumtree.com.au/s-ad/jimboomba/engine-engine-parts-transmission/turbo-masterpower-gt4598/1016665584

I'm after a t70 mate . I know it works with an ls1 & is the right size for what I wanna do .